WiMAX Technology Overview
Introduction
WiMAX (Worldwide Interoperability for Microwave Access) is a wireless communications standard designed to provide 30 to 40 megabit-per-second data rates, with the 2011 update providing up to 1 Gbit/s for fixed stations. The name WiMAX was created by the WiMAX Forum, which was formed in June 2001 to promote conformity and interoperability of the standard. The forum describes WiMAX as a standards-based technology enabling the delivery of last mile wireless broadband access as an alternative to cable and DSL.
This course is aimed at technical audience involved in the design and deployment of WiMAX networks, equipment, or software. The candidates will learn, at a high level, what WiMAX is and does. They will gain an understanding of the performance parameters of WiMAX and why WiMAX is not Wi-Fi. We will address the major objections to WiMAX including the issues of security, Quality of Service (QoS), and interference mitigation. Once it is understood why WiMAX is a viable alternative to the wireline technologies, we will discuss where WiMAX is a cost-effective alternative to traditional Telco technologies (DSL and T1). Finally, we will take a look at WiMAX existing telecommunications options and where the adoption of WiMAX can save money in the near term.
In a nutshell, this course introduces both technical aspects of WiMAX and 802.16 technologies. It enables the candidates to fully understand how WiMAX technology fits into the 4G wireless communications. WiMAX enables mobile broadband built as an advanced, efficient wireless technology. Learn about WiMAX RF and core background such as OFDM, MIMO, flat IP architecture, RF and core engineering specifically for WiMAX network design.
Course Objectives:
By the end of this course, delegates will be able to:
· Understand the basic concepts of 802.16-2004
· Understand the basic concepts of 802.16e
· Understand 802.16e Protocols (PHY, MAC)
· Understand OFDMA and SOFDMA Techniques
· Understand the technical implementation 802.16e
· Understand 802.16e RF concepts and issues
· Gain a general understanding of 802.16e systems planning, coverage and capacity
· Be able to select the most effective WiMAX type from a wide assortment of recent and emerging implementations
· Be able to perform a more efficient design and operational support of 802.16e implementation of WiMAX
Who Should Attend?
Technical staff responsible for WiMAX network (Planning, Design, Operation, Testing, Support & Troubleshooting), Technical staff responsible for implementing and supporting WiMAX networks and other wireless networks, including Design engineers, Field engineers, Test engineers & Software and hardware developers & Line maintenance staff
Course Outline:
Introduction to WiMAX
WiMAX Access
WiMAX Capabilities
· IEEE 802.16
· IEEE 802.16a
· WiMAX vs. WLAN
· WiMAX vs. Wi-Fi
· HIPERMAN
· WiMAX
· WiMAX Forum
· WiMAX Spectrum – Licensed and Unlicensed
Mesh Networks
Inter-operability & QoS
Wireless Services
WiMAX Infrastructure
WiMAX Network IP-Based Architecture
End-to-End WiMAX Architecture
WiMAX Protocol
Mobile WiMAX
· Introduction
· Physical Layer Description
· OFDMA Basics
· TDD Frame Structure
· MAC Layer Description
· Quality of Service (QoS) Support
· Mobility Management
· Security
Advanced Features of WiMAX
· Smart Antenna Technologies
· Fractional Frequency Reuse
· Multicast and Broadcast Service (MBS)
Markets for WiMAX
Current Status of WiMAX
The WiMAX Scenario
REDLINE Communications First in WiMAX
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| IT18 | 16 Feb 2020 | 20 Feb 2020 | Dubai | US$ 4200 | Book |
| IT18 | 27 Apr 2020 | 01 May 2020 | Jakarta | US$ 5500 | Book |
| IT18 | 28 Jun 2020 | 02 Jul 2020 | Cairo | US$ 3900 | Book |
| IT18 | 16 Aug 2020 | 20 Aug 2020 | Amman | US$ 4000 | Book |
| IT18 | 12 Oct 2020 | 16 Oct 2020 | Barcelona | US$ 5500 | Book |
| IT18 | 27 Dec 2020 | 31 Dec 2020 | Alexandria | US$ 3900 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
