Welding Activities, Principles & Procedures
(Meets OSHA & ASME Standards)
Introduction:
This comprehensive course meets OSHA and ASME standards. It goes from basic torch cutting to more advanced arc and TIG welding techniques. It will help you develop knowledge of welding activities, procedures and standards. You will also be able to develop a working knowledge of different welding techniques, equipment setup and operations. Throughout the course participants will learn about different welding processes such as Shield metal Arc Welding (SMAW), Metal Active Gas (MIG/MAG),Tungsten Inert Gas (TIG), Oxy-Acetylene (OA) and metallurgy (before, during and after welding). Besides, the course will help participants develop a good understanding of Welding standards.
The candidates will gain a solid understanding about the various welding processes used for fabrication or manufacturing. You will learn about the factors that impact weld quality. Increase your understanding of applied metallurgy and your knowledge of weld references on welding prints. You will discover the importance of following safety guidelines and approved welding procedures. You’ll also learn the basics of troubleshooting weld defects. This course material is in accordance with AWS, American Welding Society standards.
Course Objectives:
By the end of this course delegates will be able to:
Who Should Attend?
Welders, Fabricators, Foreman Mechanical Maintenance, Welding Supervisors, Senior Welders and Operators, Welding metallurgy technician, Welding Technician & Foremen, Engineering Technicians, Pipefitters, Weld Inspectors, Production Welders, Managers, Engineers, Production and Maintenance Personnel, & anyone who uses or may use electric or gas welding/brazing/cutting tools, regardless of experience or where they use the tools
Course Outline:
· An Introduction to Welding Principles and Practices
· Welding Standards
· Welding Processes
· Welding Activities
· Weld Types
· Manual Welding
· Machine Welding
· Automatic Welding
· Welding Procedure Specification (WPS for the CSA code)
· Welding Procedure Data Sheet (WPDS)
· Prequalified Welding Procedure Data Sheet (PWPDS)
· Understanding Metals
· Metal Identification
· Heat Treatment
· Hard Surfacing
· Specialty Metals
· Arc Welding
· Shielded Metal Arc Welding (SMAW)
· Gas Metal Arc Welding (GMAW)
· Flux Cored Arc Welding (FCAW)
· Gas Tungsten Arc Welding (GTAW)
· Structural Steel and flux Corded Arc Welding
· Metal Arc, Oxy and Flux Core Welding
· Welding and Cutting Safety
· Protective Clothing, Equipment & Measures
· Oxy-Acetylene Flame Cutting and Gouging
· Oxyacetylene Torch Uses
· Oxy-Acetylene Fusion Welding & Braze Welding
· Brazing and Soldering
· Air Carbon-Arc Gouging and Plasma Arc
· Cutting and Gouging
· Fuel Tank Repair
· Maintenance of Welding Equipment
· Controlling Weld Quality
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| WT06 | 03 Feb 2020 | 14 Feb 2020 | Kuala Lumpur | 7500 | Book |
| WT06 | 20 Apr 2020 | 01 May 2020 | Geneva | US$ 9500 | Book |
| WT06 | 01 Jun 2020 | 12 Jun 2020 | London | US$ 8000 | Book |
| WT06 | 23 Aug 2020 | 03 Sep 2020 | Dubai | US$ 7000 | Book |
| WT06 | 12 Oct 2020 | 23 Oct 2020 | Istanbul | US$ 7500 | Book |
| WT06 | 06 Dec 2020 | 17 Dec 2020 | Cairo | US$ 6500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
