Thermal Operations & Water
Treatment
Introduction:
This course is
designed to cover the operation of steam injection used in Thermal Recovery
technique in the oil industry for Heavy Oil recovery. Thermal Recovery Methods
are the best techniques for ultimate recovery and it is usually applied to
heavy and medium oil. The course will mainly deal with the operation of surface
facilities for steam injection process plants and will provide a practical
guide to water treatment operations, steam generation, chemical dosing and
boiler water treatment strategies. The candidates will also learn the
importance of water treatment guidelines, thermodynamic properties of water
(steam), heat loss and heat transmission calculation and how to prevent scale,
corrosion and fouling.
Course
Objectives:
By
the end of this course delegates will learn about:
· Oil production
and enhanced oil recovery
· Steam injection
& thermal recovery
· Water treatment
for steam generation
· Steam
generation and steam properties
· Thermodynamics
of water (steam) phases
· Surface
troubleshooting and steam process upsets
Who Should Attend?
Steam Process
Engineers & Technicians, LSP Shift Supervisor, Production Engineers &
Technicians, Mechanical & Instrumentation Engineers & Technicians,
Quality Control Chemists & Technicians, Corrosion Control Personnel
Course
Outline:
Overview
of Reservoir Characteristics
· Porosity; oil saturation
and permeability
· Reservoir depth; reservoir geology, viscosity
and temperature
· Reservoir production mechanics and crude oil
composition
· Formation thickness; oil gravity and mobility
Thermal Properties of
Rocks and Fluids
· Thermodynamics properties
of water (steam)
· Water: solid, liquid and
vapor Enthalpy
· Superheated steam behavior
· Tables and charts for
specific volume for saturated steam and superheated steam
· Steam quality, measurement
and calculation
· Thermodynamic correlations
to determine steam properties
Steam
Generators for Thermal Recovery
· General specs and practices
· Steam generator efficiency
calculations and efficiency determination
· Water characteristics for
steam generation
Properties
of Water
· Dissolved gases and
minerals
· Dissolved and suspended
solids
· Stability index
Water
Chemistry
· pH
· Alkalinity
· Hardness
· Chlorides
· Conductivity
Pre-Treatment
Methods
· De-aeration
· Filtration
Post-Treatment
Methods
· Chemicals for boiler water
Water
Desalination Plants
· Ion exchangers
· Reverse Osmosis
Boiler
Fundamentals
· Fire tube boilers
· High pressure boilers
· Steam boilers
Boiler
Operation and Testing
· Start-up and shut-down
· Normal operation
· Valve types
· Safety valves
· Low water cutoff controls
Controls
and Safety Devices for Boilers
· Water level control
· Temperature control
· Pressure control
Piping,
Fittings and Distribution Network
· Piping materials and
construction
· Pipe sizing
· Steam fittings
· Expansion joints
· Energy loss
· Asbestos insulation
Steam
Valve Maintenance
· Types of manual control,
pilot control & automatic operation
· Leakage and leak detection
· Valve testing , maintenance
and packing, lapping & adjustments
Safety
Relief Valves
· Types and codes
· Setting and testing
· Maintenance & adjustments
Steam
System Management and Maintenance
· Steam effects on mechanical
components
· Steam system
troubleshooting
Boiler
& Steam Water Side Problems
· Corrosion & pitting
· Biological fouling
· Scale formation
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| PO42 | 03 Feb 2020 | 07 Feb 2020 | Zurich | US$ 6000 | Book |
| PO42 | 26 Apr 2020 | 30 Apr 2020 | Cairo | US$ 3900 | Book |
| PO42 | 15 Jun 2020 | 19 Jun 2020 | Barcelona | US$ 5500 | Book |
| PO42 | 17 Aug 2020 | 21 Aug 2020 | Milan | US$ 5500 | Book |
| PO42 | 19 Oct 2020 | 23 Oct 2020 | London | US$ 5000 | Book |
| PO42 | 28 Dec 2020 | 01 Jan 2021 | Bali | US$ 5500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
