Pump & Valve Technology &
Fitness for Service of Pressure Vessels & Tanks
Introduction:
The course
will cover topics concerning different types of industrial valves, the control
valves and the safety relief valves. Hydraulic pumps, the dynamic and the positive
displacement types will be addressed in this course. The sealing and flushing
systems plus bearing and lubrication loops are also covered. The selection and
troubleshoot of such systems will also be addressed in detail. The candidates
will learn how different system operate, their limit of performance and the
best operating condition with least troubles and least failure. The candidates
in this integrated and comprehensive course will learn to apply the rules of
the API/ASME 579 standard “Fitness-for-Service” to evaluate the integrity and
remaining life of pressure vessels, storage tanks and piping systems, to make
cost effective run-repair-replace decisions, and select the appropriate repair
options.
Course
Objectives:
· Gain
deeper understanding of the control valves and safety relief valves used in
different industrial applications.
· Learn
more about different types of hydraulic as well as dynamic pumps, their
performance, operation, control and troubles shooting
· Be able
to select the appropriate type of valves and pumps for the application
· Be
familiar with the latest techniques to determine the fitness-for-service of
operating tanks, vessels, piping systems and pipelines
· Make cost-effective run-or-repair decisions
based on the principles of API recommended practice 579 “Fitness-for-Service”
Who
Should Attend?
Maintenance,
Mechanical Engineers, Foremen, Supervisors and Technicians, Production
Supervisors and Engineers who require an understanding of the Fitness for Service
standard, Design and System Engineers, Inspectors, Project and Maintenance
Engineers who are personally responsible for the reliable design, operation,
maintenance and repair of equipment, systems, tanks, vessels, piping and
pipelines, Heads of Maintenance and Operation, Chemical Engineers, Equipment
Specialists, Technical Engineers, Operation Engineers, Planning Engineers,
Engineers involved with control and safety valves and pumps of different types
Course
Outline:
PART1: Valves
· Control Valves
· Valves Performance
· Valves Design
· Valves Actuators
· Hydraulic Actuators
· Pneumatic Actuators
· Valves Positioners
· Safety and Relief Valves
· Valves Design
· Spring Loaded Pressure Relief valves
· Balanced Relief Valves
· Valves Characteristics
· Design Pressure
· Valve Installation
· Valves Sizing and Selection
· Valve Sizing Simplified Method
· Valves Troubleshooting
· Common Valve Problems
PART2: Pumps
· Hydraulic Pumps
· Types and Designs
· Operation
· Cavitation
· Foam and Bubbles
· Overheating
· Capacity Control
· Dynamic Pumps
· Centrifugal Pumps
· Axial Flow Pumps
· Performance & Operation
· Multistage Pumps
· Balancing Systems
· Cavitation Problem
· Sealing Systems
· Mechanical seals
· Bearings and Lubrication
· Troubleshooting
PART3: Foundations
of Fitness-For-Service Assessment
· Introduction
o Overview of the American Petroleum Institute
(API) codes and standards
o Overview of the American Society of Mechanical
Engineers codes and standards
· Fitness For Service
o Overview of API 579 contents, objectives and
applications
o How to apply API 579 for cost-effective
run-or-repair decisions
o Fitness-for-Service assessment procedure
o An overview of what is new in the latest
release
· The FFS Assessment
o Structure if the Standard
o The FFS procedure
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| MME50 | 23 Feb 2020 | 27 Feb 2020 | Dubai | US$ 4200 | Book |
| MME50 | 20 Apr 2020 | 24 Apr 2020 | Kuala Lumpur | US$ 4500 | Book |
| MME50 | 15 Jun 2020 | 19 Jun 2020 | Marbella | US$ 5500 | Book |
| MME50 | 10 Aug 2020 | 14 Aug 2020 | Bali | US$ 5500 | Book |
| MME50 | 12 Oct 2020 | 16 Oct 2020 | Seoul | US$ 6000 | Book |
| MME50 | 20 Dec 2020 | 24 Dec 2020 | Manama | US$ 4000 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
