Search

Seminars

Advanced Drilling Technology

Introduction:

This course offers a foundation in the principles and practices of advanced drilling engineering. It provides participants with an introduction to advanced drilling topics such as High Pressure High Temperature (HPHT) drilling, modern drilling technologies (i.e. casing drilling, unconventional drilling methods), special well design, drilling problems and their solutions. The candidates will be guided through planning and evaluating drill string design and learn how to perform simple calculations associated with well tubular design. Advanced drilling techniques such as casing drilling or coiled tubing drilling are also covered in the course. The candidates will become familiar with the tools and techniques used in casing or tubing drilling such as surface equipment, bottomhole assemblies (BHA), etc. Finally, the participants will be able to decide which technology is more appropriate for their business using decision matrix.

Course Objectives:

By the end of this course delegates will learn about:

· Introduction to class, review of important topics of drilling engineering

· Drill string mechanics: loads, cause of failure, design concepts

· Mechanized drilling operations: makeup of tubular, mechanized drilling rigs

· Drilling problems: stuck pipe situations, fishing operations

· Advanced drilling technologies - casing drilling, HPHT, coiled tubing drilling

· Proper selection of drilling technology for shale gas, geothermal drilling, etc.

· Non-conventional drilling methods and equipment including environmental aspects of drilling activities

· Drilling through gas hydrates

Who Should Attend?

Drilling Engineers, Senior Drilling Engineers, Drilling Supervisors, Petroleum Engineers, Completion Engineers, Tool Pushers, Reservoir and Senior Reservoir Engineers, Geologists, Production and Completion Engineers, Foremen, Industry Personnel

Course Outline:

· Short review of drilling engineering

· Drilling methods and drilling technologies

· Preparation for drilling operations

· Drilling operations

· Drilling calculations

· Drilling hydraulics

· Drill string design

· Casing string design

· Drill string mechanics

· Mechanized drilling operations

· Drilling problems and their solutions in modern drilling operations

· Coiled tubing drilling technology

· Casing drilling technology and casing fatigue

· Expandable tubular and their applications

· Drilling HPHT wells

· Drilling fluids for HPHT environment

· Wellbore hydraulics

· Non-conventional drilling methods

· High performance drilling concepts

· Drilling through gas hydrates

· Drill bit optimization and selection

· Bit separation and evaluation

· Well evacuation (coring, logging and testing)

· Abnormal pressure prediction and detection

· Cementing

· Directional well planning

· Wellheads

· BOP’s and operating systems

· Stuck pipe and finishing

· Special well control situations

· Drilling optimisation

· Drilling problems

· Aspects wellbore construction and wellbore integrity

· Proper selection of drilling technologies and methods for your business

· Final review

COURSE LOCATIONS

Code From To City Fee
DE05 13 Jan 2020 24 Jan 2020 Kuala Lumpur US$ 7500 Book
DE05 02 Mar 2020 13 Mar 2020 London US$ 8000 Book
DE05 03 May 2020 14 May 2020 Dubai US$ 7000 Book
DE05 13 Jul 2020 24 Jul 2020 California US$ 9000 Book
DE05 14 Sep 2020 25 Sep 2020 Istanbul US$ 7500 Book
DE05 01 Nov 2020 12 Nov 2020 Cairo US$ 6500 Book


DUBAI OFFICE

Ittihad Deira Building,
Al Ittihad Rd, Deira
Dubai,
UAE

info@petrogas-training.com

USA OFFICE

642 E14 Street,
10009-13 Manhattan,
New York (NY)
USA

info@petrogas-training.com

EGYPT OFFICE

52 General Kamal Hejab Street,
Suez Bridge,
Cairo,
Egypt

info@petrogas-training.com
 

COURSE CERTIFICATE

Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.


TRAINING HOURS

Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.


TRAINING METHODOLOGY

We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.


ASSESSMENT & EVALUATION

Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.


ORGANIZATIONAL IMPACT

A- Have staff trained in the latest training and development approaches

B- Support nationalization and talent management initiatives

C- Have properly trained and informed people who will be able to add value

D- Gain relevant technical knowledge, skills and competencies


PERSONAL IMPACT

A- Develop job related skills

B- Develop personal skills in subject matter

C- Have a record of your growth and learning results

D- Bring proof of your progress back to your organization

F- Become competent, effective and productive

G- Be more able to make sound decisions

H- Be more effective in day to day work by mastering job-related processes

I- Create and develop competency to perform job well


FREQUENT NOMINATIONS SCHEME

A- 10% discount after 05 candidates’ registration.

B- 15% discount after 10 candidates’ registration.    

C- 20% discount after 20 candidates’ registration.

D- 25% discount after 25 candidates’ registration.

E- 30% discount after 30 candidates’ registration

F- Higher discount rates will be offered based on work volume with different clients.  


SEVERAL NOMINATIONS ON THE SAME COURSE SCHEME

A- One extra free seat is offered on 4 candidates on the same course and dates.

B- Two extra free seats are offered on 6 candidates on the same course and dates.

C- Three extra free seats are offered on 8 candidates on the same course and dates.

D- Four extra free seats are offered on 10 candidates on the same course and dates.

E- Five extra free seats are offered on 12 candidates on the same course and dates.


REGISTRATION POLICY

Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s). 


CANCELLATION POLICY

If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.


PAYMENT POLICY

Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.


COPYRIGHT

© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.