Safety Engineering Best Practices

Introduction:

Many organizations in the Middle East do not implement the latest relevant International Safety Standards for machinery, work equipment and for the design of control and protective systems with safety-related functions. This program, based on NEBOSH standards, is intended to update the participants with the most relevant up-to-date international standards in the field of safety technology.

Course Objectives:

By the end of this course delegates will be able to:

Familiarize with the risk-based approach to construction safety and contract work.
Improve their experience in the application of reliability technology for the selection of appropriate Safety Integrity Levels (SIL) for protective and safety systems
Ensure consistent optimization of resource allocation for production, maintenance and safety, based on risk and cost-benefit analysis.
Improve practical application of reliability and risk assessment techniques to new projects and existing machinery systems
Update knowledge on modern concepts of machinery and work equipment safety based on the latest International machinery safety standards
Develop a clear understanding of machinery and work equipment risk assessment techniques
Review the role of modern concepts for the design of fluid power machinery and systems.
Develop adequate level of skills for construction safety plans and project work.
Describe the consequences and mechanism of fire, explosion and toxic releases.

Who Should Attend?

Technical personnel involved in project work, personnel involved in construction activities, mechanical, electrical, instrumentation, maintenance, design and HSE technical personnel

Course Outline:

Machinery Safety

· Review of the causes of machinery and work equipment accidents

· Review of relevant European and International machinery safety standards.

· Duties of designers suppliers of new machinery

· Duty of management for existing and new machines and work equipment safety

· The role of risk assessment within International machinery safety standards

· Selection of the type and level of integrity of Machinery Safeguards and Safety Devices

Construction Safety

· Review of causes and methods for preventing construction activities incidents

· Construction site and activities hazards identification

· The role of task-based risk assessment in preparing Method Statements

· Construction activities Safety Plan

· How to audit and review contractors

Introduction to Reliability Technology

· Introduction into Reliability Technology

· Reliability calculation

· Types of failures: the bathtub curve

· Types of inspection and maintenance

· Types of systems: series parallel and non-series non parallel

Protective Systems Design and Reliability

· Elements of control and protective systems

· Reliability of control systems

· The concept of fractional dead time and protective systems

· High Integrity Protective Systems 'HIPS'

· Hazardous Area Classification

· Active fire explosion protection systems

· Control Systems with safety-related functions

Analysis of the Consequences of Major Hazards

· Mechanics and types of fire and explosions

· Effects of pool fires, jet flames and flash fires on personnel and structures

· Vapour cloud explosions and BLEVE

· Modern software tools for modelling of fires, explosion and toxic releases

· Personal action plans, program review and the way ahead

COURSE LOCATIONS

Code	From	To	City	Fees
EHS02	03 Feb 2020	14 Feb 2020	California	US$ 9000	Register
EHS02	05 Apr 2020	16 Apr 2020	Dubai	US$ 7000	Register
EHS02	01 Jun 2020	12 Jun 2020	Kuala Lumpur	US$ 7500	Register
EHS02	03 Aug 2020	14 Aug 2020	Istanbul	US$ 7500	Register
EHS02	04 Oct 2020	15 Oct 2020	Cairo	US$ 6500	Register
EHS02	07 Dec 2020	18 Dec 2020	London	US$ 8000	Register

DUBAI OFFICE

Ittihad Deira Building,
Al Ittihad Rd, Deira
Dubai,
UAE
info@petrogas-training.com

USA OFFICE

642 E14 Street,
10009-13 Manhattan,
New York (NY)
USA
info@petrogas-training.com

EGYPT OFFICE

52 General Kamal Hejab Street,
Suez Bridge,
Cairo,
Egypt
info@petrogas-training.com

COURSE CERTIFICATE

Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.

TRAINING HOURS

Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.

TRAINING METHODOLOGY

We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.

ASSESSMENT & EVALUATION

Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.

ORGANIZATIONAL IMPACT

A- Have staff trained in the latest training and development approaches

B- Support nationalization and talent management initiatives

C- Have properly trained and informed people who will be able to add value

D- Gain relevant technical knowledge, skills and competencies

PERSONAL IMPACT

A- Develop job related skills

B- Develop personal skills in subject matter

C- Have a record of your growth and learning results

D- Bring proof of your progress back to your organization

F- Become competent, effective and productive

G- Be more able to make sound decisions

H- Be more effective in day to day work by mastering job-related processes

I- Create and develop competency to perform job well

FREQUENT NOMINATIONS SCHEME

A- 10% discount after 05 candidates’ registration.

B- 15% discount after 10 candidates’ registration.

C- 20% discount after 20 candidates’ registration.

D- 25% discount after 25 candidates’ registration.

E- 30% discount after 30 candidates’ registration

F- Higher discount rates will be offered based on work volume with different clients.

SEVERAL NOMINATIONS ON THE SAME COURSE SCHEME

A- One extra free seat is offered on 4 candidates on the same course and dates.

B- Two extra free seats are offered on 6 candidates on the same course and dates.

C- Three extra free seats are offered on 8 candidates on the same course and dates.

D- Four extra free seats are offered on 10 candidates on the same course and dates.

E- Five extra free seats are offered on 12 candidates on the same course and dates.

REGISTRATION POLICY

Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).

CANCELLATION POLICY

If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.

PAYMENT POLICY

Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.

COPYRIGHT

© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.