ASME’s Process Piping Design
(Conforms to ASME Code B31.3)
Introduction:
This course will introduce participants to
the ASME B31.3 Process Piping Code. The Code provides requirements for the
design, fabrication, examination and testing of metallic piping systems
designed for the wide variety of fluid services used in the process industries.
Selection of materials, pipe, valves and fittings will be discussed. This
course will show the candidates how piping systems fail and what the Code
requires the designer, manufacturer, fabricator, supplier, erector, examiner,
inspector and owner to do to prevent that is the aim of this intensive four-day
seminar. Using hundreds of real-world examples as well as the personal
experiences of the instructors, the course demonstrates how the B31.3 Code has
been both correctly and incorrectly applied. Lessons are enhanced by
actual in-class problem solving, directly applying the rules and equations of
the B31.3 Code for specific design and operating conditions to illustrate
correct applications.
This course contains requirements for piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants, and related processing plants and terminals. The requirements cover materials and components, design, fabrication, assembly, erection, examination, inspection, and testing of piping. This Code applies to piping for all fluids including raw, intermediate, and finished chemicals; petroleum products; gas, steam, air and water; fluidized solids; refrigerants; and cryogenic fluids. Also included is piping which interconnects pieces or stages within a packaged equipment assembly.
Course
Objectives:
By the end of
this course delegates will be able to:
· Identify what
issues to take into consideration when designing process piping
· Explain the
pressure design of piping and piping components
· Analyze piping
flexibility and gauge the limitations of piping and piping components
· Identify pipe
supports, leak testing, piping failures and their causes
Who
Should Attend?
Piping engineers and designers, fabricators
and erectors, QA/QC personnel, engineers and maintenance personnel who desire a
more in depth understanding of the Fabrication and Examination rules of the
ASME Codes & Standards, operation, mechanical and maintenance personnel,
inspection and quality personnel responsible for specifying, operating,
inspecting and maintaining piping systems, code compliance personnel,
regulatory personnel, consulting engineers, design engineers, maintenance
engineers, project engineers, maintenance personnel, service engineers,
planners and schedulers, M & E foremen, technical assistants &
coordinators & technicians
Course
Outline:
· History of Codes
· Definitions
· Code Jurisdiction
· How the Code is Organized
· Piping Fundamentals
· ASME Codes & Standards
· Pipe Fittings
· Flanges
· Valves
· Special Elements
· Mechanical/Process Equipment
· Flow Diagrams
· Piping Specifications
· Piping & Equipment Layout
· Piping Isometrics
· Piping Spools
· Pipe Supports
· Considerations of Design
· Fluid Service Categories
· Pressure Design of Piping and Piping
Components
· Pressure Design Calculations
· Continue Pressure Design of Piping
and Piping Components
· Piping Flexibility Analysis
· Limitations of Piping and Piping
Components
· Leak Testing
· Piping Failures and their Causes
· Material Selection for General and
Aggressive Service
· Piping Reference Standards
· Pipe Stress Analysis.
· Pipe Span Calculations
· Expansion Loops & Expansion
Joints
· Layout Solutions for Weight,
Thermal, & Wind Loads.
· Sustained Loads
· Flexibility Analysis using Code
Equations
· Occasional Loads
· Welding of Piping Systems
· Examination, Inspection and Testing
| Code | From | To | City | Fees | |
|---|---|---|---|---|---|
| PP01 | 06 Jan 2020 | 17 Jan 2020 | Kuala Lumpur | US$ 7500 | Register |
| PP01 | 02 Mar 2020 | 13 Mar 2020 | Istanbul | US$ 7500 | Register |
| PP01 | 03 May 2020 | 14 May 2020 | Cairo | US$ 6500 | Register |
| PP01 | 05 Jul 2020 | 16 Jul 2020 | Dubai | US$ 7000 | Register |
| PP01 | 07 Sep 2020 | 18 Sep 2020 | Bangkok | US$ 7500 | Register |
| PP01 | 02 Nov 2020 | 13 Nov 2020 | London | US$ 8000 | Register |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.