Process, Electrical & Instrumentation Drawings & Documentation
Introduction:
This course is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to mastering plant documentation and diagrams. It covers the flow of documentation from design through manufacture to maintenance and operations. The course looks at the applications of each diagram type detailing where and when the document should be used. During the life span of any plant, a multitude of different vendors will supply plant modifications and equipment as the plant is continuously enhanced. The quality of the documentation produced will vary enormously with each new supplier. The candidates will be given the skills to apply a standardized internationally acceptable set of standards to your plant documentation.
Course Objectives:
By the end of this course delegates will be able to:
Who Should Attend?
Instrument personnel, CAD technicians, consulting engineers, designers, design engineers, draughtsman, electrical engineers and technicians, electricians, hydraulic technicians, Instrument technicians, maintenance engineers and staff, maintenance technicians and supervisors, mechanical engineers and technicians, operation, inspection and repair managers, supervisors and engineers, plant engineers, project leaders
Course Outline:
Introduction
· Focus of course
· The role of plant documentation, standards and specifications
Drawing Types & Standards
· Who sets the standards (ISA, IEC, ISO)
· Understanding diagram layouts and formats
· Cross references
· ISO 9002 and document control
Fundamentals
· Relays, Transducers, Switches
· Gate logic, Fail safe design
Piping & Instrument Diagrams (P&ID)
· Process flow diagrams
· An introduction to the PFD, P&ID, UFD, MFD
· Control loops on the P&ID
· HAZOP, Mass balance, Functional spec
Instrumentation
· Document types, Instrument lists, Logic diagrams
· Wiring diagrams, Indexes, Schedules and lists
· Block diagrams, Data sheets, Loop diagrams
· Hands on circuit function, Fault finding
· Standards and symbols, Nomenclature
Electrical
· Electrical standards, Electrical document types
· Main circuits, Control circuits, Symbols
· Nomenclature, Hands on determine function, fault-finding
Pneumatics & Hydraulics
· Introduction
· Standards
· Layout and symbols
· Basic circuits
· Deducing principle of operation
· Hands on session
Ladder Logic
· Introduction and overview
· Standards and layout
· Power supply circuits
· Hands on circuit design
Electro Pneumatic Circuits
· Overview
· Truth tables
· Fault finding
· Principle of operation
Explanation of Acronyms
· P&ID means Piping and Instrumentation Diagrams etc.
| Code | From | To | City | Fees | |
|---|---|---|---|---|---|
| INST03 | 05 Jan 2020 | 16 Jan 2020 | Dubai | US$ 7000 | Register |
| INST03 | 02 Mar 2020 | 13 Mar 2020 | Sydney | US$ 9500 | Register |
| INST03 | 04 May 2020 | 15 May 2020 | Istanbul | US4 7500 | Register |
| INST03 | 05 Jul 2020 | 16 Jul 2020 | Cairo | US$ 6500 | Register |
| INST03 | 14 Sep 2020 | 25 Sep 2020 | Kuala Lumpur | US$ 7500 | Register |
| INST03 | 02 Nov 2020 | 13 Nov 2020 | Bangkok | US$ 7500 | Register |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.