Gas Lift & Gas Pumping Operations
Introduction:
When oil or gas is being produced the reservoir pressure reduces. At a certain point in time it can happen that the pressure in the reservoir becomes too low for production and artificial lift and pumping can be required. This course covers the natural flow and artificial lift, reservoir inflow and multiphase outflow, well performance characteristics, the gas lifts system and its four major components, well deliverability and gas injection ratio, comparison of continuous flow and intermitting lift, continuous flow operation, troubleshooting and optimization, gas lift design with unlimited gas and pressure, gas lift design with limited pressure and gas availability, start-up and surveillance procedures, prioritization of wells, and gas lift and pumping optimization. This course will enhance the participants’ knowledge, skills, and attitudes necessary to understand the gas lift and pumping and technologies specially the proper selection, operation and maintenance of subsurface pumps so the best economical life can be obtained.
Course Objectives:
By the end of this course delegates will be able to:
Who Should Attend?
Supervisors, Production Engineers, Technologists & Coordinators, Senior Operators, Production Personnel
Course Outline:
· Introduction (natural flow & artificial lift)
· Application and basic operating principles
· Gas-lift equipment
· Well evaluation
· Review of fundamentals
· Productivity index and inflow performance relationship
· Static and flowing pressure gradients
· Calculation of gas-lift production rate
· Gas-lift model
· Injection-pressure valve design
· Valve mechanics
· Graphical design and valve calculations
· Reservoir inflow & multiphase outflow
· Well Performance Characteristics
· The Gas Lift System & its four major components
· Well deliverability & gas injection ratio
· Comparison of continuous flow & intermitting lift
· Continuous flow operation – troubleshooting & optimization
· Gases lift design with unlimited gas and pressure
· Gas Lift design with limited pressure & gas availability
· Start-up & Surveillance procedure
· Prioritization of wells
· Gas lift optimization
· Operation and troubleshooting
· Unloading and optimizing production rate
· Troubleshooting tools and techniques
| Code | From | To | City | Fees | |
|---|---|---|---|---|---|
| PO28 | 23 Feb 2020 | 05 Mar 2020 | Doha | US$ 7000 | Register |
| PO28 | 20 Apr 2020 | 01 May 2020 | Bangkok | US$ 7500 | Register |
| PO28 | 21 Jun 2020 | 02 Jul 2020 | Alexandria | US$ 6500 | Register |
| PO28 | 10 Aug 2020 | 21 Aug 2020 | Hong Kong | US$ 8500 | Register |
| PO28 | 18 Oct 2020 | 29 Oct 2020 | Dubai | US$ 7000 | Register |
| PO28 | 14 Dec 2020 | 25 Dec 2020 | Paris | US$ 9000 | Register |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.