Valves Selection, Maintenance &
Repair
Introduction:
The overall
purpose of this course is to provide engineers and senior technicians in their
relevant fields with the applied knowledge that enables them to efficiently
select, maintain or repair different types of valves, including control valves
and their accessories. The course provides a comprehensive overview about the
basis behind the selection of different types of valves used in oil & gas
industry. In addition it covers valves selection, installation, testing &
carry out preventive, predictive and corrective maintenance on valves. Emphasis
is placed on selection, sizing and maintenance of different valve types
Course
Objectives:
By the end of
this course delegates will learn about:
· The ability to
carry out the selection and sizing process
· Understanding the
problems and phenomenon associated with valves operation
· The ability to
select the right valve for the particular application
· The ability to
perform the necessary calculation for valve sizing
· The ability to
carry out troubleshooting of valves and systems that valves are connected to
· The ability to
perform troubleshooting of systems involving valves
· The ability to
decide on the right maintenance plan concerning different types of valves
· Safety and
relief valves play a vital rule for the safety concerning equipment and
personnel
Who
Should Attend?
Maintenance
& Technical Support Engineers & Supervisors, Maintenance &
Technical Support Engineers & Supervisors, Senior Foremen Mechanical
Maintenance, Engineering, inspection and technical staff in pining designs,
process, operations and maintenance, Engineers and working operators in field
of pipelines, The course provides a wider knowledge to piping designers,
engineers, technicians, foremen inspectors & repair-men.
Course
Outline:
· Classification
of Valve Types
o Valve functions and characteristics
o Basic valve parts
o Valve body attachments
· Valve
Selection for Petroleum and Process Industry
o Principles of valve operations
o Specifications
o Body materials and dimensions
o Pressure and temperature
o Wear, galling, and leakages
o Flow characteristics & noise
o Sizing, including actuators
o Which valve for on-off service?
o Which control valve to specify?
· Specification
and Applied Codes
o API
o ASM
o French, British and German
regulations
· Critical
Valve Choices
o Internal working
o End connection
o Bonnets
o Actuator
o Acceptance procedure for in-house
valve testing and verification
o Noise abatement for valves
· Installation
Maintenance Guidelines
o Cleaning and inspection guidelines
o Cautions for every type
o Fouling leakage
o Wear leakage
o Maintenance of special valve types
o Lining up valves for a system start
up
o Using plant procedures and drawings
o Lubricating valves
o Valve inspection and cautions
o Repair and replacement of valve
parts
o Corrosion control in valves - diagnostic
tools
o Safety aspects
· Preventive
Maintenance
o General philosophy
o Upside
o Downside
o CLAIR activities
· Predictive
Maintenance
o Monitoring techniques
o Twelve essential steps in building
a PDM program
· Valves
Problems and Troubleshooting
o High pressure drop
o Pressure recovery characteristics
o Cavitations in valves
o Incipient and choked cavitations
o Flow curve cavitations index
o Cavitations - elimination devices
o Flashing versus cavitations
o Flow choking
o High velocities
o Water hammer
o Surge protection
o Check valve slamming
o Noise problems
o Clean air standards
o Life loading
o Packing for fugitive-emission control
o Troubleshooting the control valves
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| MME51 | 26 Jan 2020 | 06 Feb 2020 | Dubai | US$ 7000 | Book |
| MME51 | 09 Mar 2020 | 20 Mar 2020 | Frankfurt | US$ 9500 | Book |
| MME51 | 25 May 2020 | 05 Jun 2020 | Manila | US$ 8500 | Book |
| MME51 | 27 Jul 2020 | 07 Aug 2020 | Barcelona | US$ 8500 | Book |
| MME51 | 14 Sep 2020 | 25 Sep 2020 | Hong Kong | US$ 9000 | Book |
| MME51 | 08 Nov 2020 | 19 Nov 2020 | Alexandria | US$ 6500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
