Troubleshooting and Problem Solving
of PLCs & SCADA
Introduction:
The objective of this course is to
help you troubleshoot, identify, prevent and fix common PLC and SCADA problems.
The emphasis is on hard hitting information that goes beyond typical theory,
focusing unerringly on providing you with the necessary skills to solve your
problems whether it is a PLC, SCADA system, or indeed communications system
linking the two together. This course is designed to benefit you with
up-to-date information on the application of PLCs for the automation and
process control of plants and factories. It will assist you with
troubleshooting your PLC and SCADA systems. The content of the course brings
everyone up to date by briefly reviewing PLC and SCADA systems and then
examining in a logical step-by-step fashion with hands-on exercises (both PLCs
and simulation software to get to the problems quickly) PLCs and SCADA systems.
The key industrial communications problems are briefly covered.
Course
Objectives:
By the end of this course delegates
will be able to:
· Interpret,
isolate and fix common hardware problems related to PLC input/outputs
· Troubleshoot
PLC software
· Identify
typical SCADA problems and fix them
· Safely make
changes to a system without overriding machine safety or personnel safety
programming
· Make temporary
fixes to a program to test out new components or ideas
· Identify and
fix electrical noise, earthing and power problems
· Identify and
fix PLC/SCADA data communications problems
Who
Should Attend?
Control
engineers, design engineers, electrical engineers, electricians,
instrumentation engineers, instrumentation technicians, IT technicians and IT
staff, operators, project engineers, plant engineers, anyone working with
PLCs
and those who want to achieve good proficiency in troubleshooting their PLC and
SCADA systems
Course
Outline:
· Introduction to PLCS and SCADA Systems
· PLC
Input/Output Modules
· SCADA
Hardware
· Power
Supplies
· Good Installation practice
· Fundamentals of PLC Software
· SCADA Software
· Industrial Data Communications System
· Basics of Troubleshooting & Diagnosing Equipment
· PLCS Power and Earth
· Troubleshooting PLC Inputs/Outputs
· Troubleshooting PLC Analog Input/Outputs
· PLC Software Issues
· SCADA Troubleshooting Road Map
· Review of the Key SCADA Troubleshooting
Issues
· SCADA System Troubleshooting, PLC/SCADA Interfacing
Problems
· Human Machine Interface (HMI)
· Configuration of Database Points
· Troubleshooting I/O Database
· SCADA Alarm Configuration Issues
· SCADA to PLC Interface Issues
· Key Industrial Data Communications Problems & Troubleshooting
· Installation and Commissioning
Code | From | To | City | Fee | |
---|---|---|---|---|---|
INST26 | 09 Feb 2020 | 13 Feb 2020 | Dubai | US$ 4200 | Book |
INST26 | 06 Apr 2020 | 10 Apr 2020 | Istanbul | US$ 4500 | Book |
INST26 | 08 Jun 2020 | 12 Jun 2020 | London | US$ 5000 | Book |
INST26 | 17 Aug 2020 | 21 Aug 2020 | Orlando | US$ 5500 | Book |
INST26 | 26 Oct 2020 | 30 Oct 2020 | Shanghai | US$ 5500 | Book |
INST26 | 28 Dec 2020 | 01 Jan 2021 | Frankfurt | US$ 5500 | Book |
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.