Storage Tank Inspector Examination
Preparatory Course (API
653)
Introduction:
American
Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector
Certification Program with the issuance of Supplement 1 to API 653, Tank
Inspection, Repair, Alteration, and Reconstruction. This training course is
designed to give a detailed discussion on the required engineering knowledge
for In-service Storage tanks with emphasis on syllabus published by API (Body
of Knowledge). The preparatory course will clarify basic intentions of all code
prescribed for study, how to interpret code rulings and at the end, built-up the
confidence among the candidates for taking decisions.
The course is
divided into six main areas: Basic Storage tank design engineering i.e. API
650, In-service inspection techniques (API 653/ RP 575/ RP 577), Damage
mechanisms (API 571), Cathodic protection (API RP 651) and lining of tank
bottom (API RP 652), calculations of retirement thickness and other skills
required for delivery of quality job & safe operation. The participants
will receive comprehensive course notes, illustrated with practical case
studies, main punch-points of the course to impart knowledge to the candidates.
Course
Objectives:
By the end of this course delegates will be able to:
Who
Should Attend?
Engineers, Supervisors, and Managers, Mechanical, Inspection, Maintenance & Operations, Technical & Engineering, Corrosion Engineers, personnel and design persons involved in integrity assessment of in-service tanks, repairs and replacement of old tanks
Course
Outline:
Fundamentals of Storage Tank
Design & Construction (API 650)
· Allowable stress values shell,
roof and bottom Design
· Material selection
· Impact test requirement of API
650
· Impact test results
· Shell thickness calculations
· Bottom plate thickness
calculations
· Roof plates calculations
· Nozzle openings calculations
· API 650 Requirements for Storage
Tank fabrication, erection, NDT and leak testing
Understanding of Storage Tank Inspection
Code (API 653)
· Introduction, scope, definitions
and organization of API 653
· Intervals and scope of
inspections
· Data evaluation and corrosion
assessment of roof, shell, and bottom
· Estimation of corrosion rate
· Inspection and testing practices
of API 653
· Evaluation for brittle failure
· Repairs, alterations &
reconstruction of storage tanks
· Tank relocation and re-erection
· Replacement of tank bottom, hot
tapping on tank shell
· Detail discussions on material
corrosion and degradation (API 571), NDT of tank repairs, leak testing
Storage Tank Inspection
· Discussions on cathodic
protection methods against soil corrosion
· (API RP 651)
· Recommended practices for
inspection of storage tanks (API RP 575)
· Introduction to Sec IX, Case
studies of checking of PQR & WPS
Discussions on Corrosion
Protection & Quality of Welding
· Discussions on Lining of bottoms
of storage tanks (API RP 652)
· Discussions on API RP 577 and
Welding Inspection
· Understanding the difference
between Inspection and Examination and Various NDE methods to detect flaws in
metals
· Understanding rules imposed by ASME Sec V for various NDE techniques
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| CS08 | 10 Feb 2020 | 14 Feb 2020 | New York | US$ 5500 | Book |
| CS08 | 20 Apr 2020 | 24 Apr 2020 | Istanbul | US$ 4500 | Book |
| CS08 | 08 Jun 2020 | 12 Jun 2020 | Kuala Lumpur | US$ 4500 | Book |
| CS08 | 23 Aug 2020 | 27 Aug 2020 | Dubai | US$ 4200 | Book |
| CS08 | 12 Oct 2020 | 16 Oct 2020 | Jakarta | US$ 5000 | Book |
| CS08 | 13 Dec 2020 | 17 Dec 2020 | Cairo | US$ 3900 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
