Process Vessels, Mechanical Design &
Specification
Introduction:
This course
reviews the design of mechanical components for process vessels in oil and gas
facilities. The emphasis is on codes and standards sizing calculations and
materials selection vessel specification the sizing, design, and support of
nozzles and internals fabrication, including welding and inspection, and
operations. Design problems are an integral part of this course.
This program
is mainly designed for mechanical engineers. The need for this training program
has considerably increased due to the advancement in technology by the
prospective and existing equipment design and manufacturing professionals. This
course will initiate engineers to prepare and develop equipment data sheet,
design them as per relevant codes, prepare fabrication details and
specifications, estimation and quality assurance during fabrication and
assembly.
Course
Objectives:
At the end of this seminar participants will have:
· How to apply
pressure vessel codes and standards for mechanical components of process
vessels
· About sizing,
selecting materials, and specifying process vessels based on requirements from
process design data
· About
supporting internal appurtenances as part of the design and specification procedure
· About
integrating mechanical considerations in overall system design and operation
· About
integrating the key elements of fabrication, welding and inspection of process
vessels
Who
should attend?
Mechanical
engineers and design engineers who are involved in the design of pressure
vessels and appurtenances utilized in oil and gas facilities
Course
Outline:
· General
Concepts of Equipment Design
· Concepts
of Basic and Mechanical Design of Process Equipment
· Introduction
to Codes, Standards and Recommended Practices
· Introduction
to Economic Balance and Safety Factors
· Pressure
Vessel Codes and Standards
· Types
of Vessels and Design
o Separators
o Towers
o Slug catchers
o Heat exchangers
· Vessel
and Key Components Design
· Pressure
vessel Design
· Process
Equipment & Pressure Vessel Technology
· Material
Technology related to Pressure Vessel Design
· Engineering
ASME Codes and Its Relation to Mechanical Design of Pressure Vessels
· Nozzle
Supports and Internals Design
· Corrosion
Considerations
· Materials
Selection and Specification
· Fabrication
· Welding
and NDT Inspection
· Transportation
and Erection
· Interface
to Piping Systems
· Operations and Maintenance Considerations
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| MME06 | 03 Feb 2020 | 07 Feb 2020 | Istanbul | US$ 4500 | Book |
| MME06 | 13 Apr 2020 | 17 Apr 2020 | London | US$ 5000 | Book |
| MME06 | 14 Jun 2020 | 18 Jun 2020 | Cairo | US$ 3900 | Book |
| MME06 | 16 Aug 2020 | 20 Aug 2020 | Dubai | US$ 4200 | Book |
| MME06 | 19 Oct 2020 | 23 Oct 2020 | Kuala Lumpur | US$ 4500 | Book |
| MME06 | 21 Dec 2020 | 25 Dec 2020 | Madrid | US$ 5500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
