Plant Piping Systems: Design,
Operation, Maintenance & Repair (Conforms to ASME Codes)
Introduction:
This course introduces operations, engineering,
maintenance, and inspection personnel to the technical bases for safely and
cost-effectively operating, maintaining and troubleshooting plant piping
systems. Practical case studies are used to illustrate the rules for assessing
the integrity of operating systems, evaluating degraded conditions, and
specifying maintenance and repair options. The course builds upon the
fundamental rules of the ASME Code and their application to operating
systems. Topics that will have the main focus are:
Course
Objectives:
By the end of
this course delegates will be able to:
· Identify the relevant codes, standards and
industry guides
· Describe the process of material selection and
properties
· Describe the process of selection and sizing pipe
and fittings
· Explain the maintenance inspection
techniques
· Identify methods for hydrostatic and leak
testing
· Describe the process of classification and
evaluation of corrosion
· Explain the evaluation of crack flaws and
mechanical damage
Who
Should Attend?
Operations,
engineering, inspection and quality personnel responsible for specifying,
operating, inspecting and maintaining piping systems
Course
Outline:
· Overview of Codes and Standards:
Design, Inspection, Fitness-for-Service
· Design Bases
· Service Conditions
· Plant Piping Specifications
· Applicable ASME Code and Industry
Guide
· Industry Best Practice and
Applications
· Six fundamental aspects of Piping
Systems Integrity
· Maintenance and Repair Work
Packages
· Design Margins vs. Operational
Margins
· Wall Thinning Corrosion
Mechanisms
· Fitness-for-Service Evaluation of
Corroded Piping and Components
· Case Histories
· Cracking Mechanisms and Crack-Like
Defects
· Fitness-for-Service Evaluation of
Crack-Like Flaws in Piping and Components
· Case Histories
· Embrittlement and Creep
Mechanisms
· Remaining Life Evaluation of Piping
in the Creep Regime
· Mechanical Damage
· Fitness-for-Service Evaluation of
Piping with Mechanical Damage
· Case Histories
· Flow-Induced Vibration: Causes,
Assessment and Resolution
· Waterhammer: The Four Classes of Transients;
Causes, Assessment, Resolution
· Risk-Based Inspection Techniques
· Repair Codes and Standards
· Welded Repairs
· Non-Welded Repairs
· Examination and Testing of Repairs
· Repair Packages and Management of
Change
· Case Histories of Classic
Accidents Due to Poor Management of Change
· Operating Strategies
· Review of Requirements of API 570
· Operator Competencies
Requirements
· Maintenance Practices and
Procedures
· Maintenance and Inspection
· Maintenance Repair
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| PP05 | 13 Jan 2020 | 24 Jan 2020 | Istanbul | US$ 7500 | Book |
| PP05 | 01 Mar 2020 | 12 Mar 2020 | Cairo | US$ 6500 | Book |
| PP05 | 04 May 2020 | 15 May 2020 | Kuala Lumpur | US$ 7500 | Book |
| PP05 | 13 Jul 2020 | 24 Jul 2020 | London | US$ 8000 | Book |
| PP05 | 06 Sep 2020 | 17 Sep 2020 | Dubai | US$ 7000 | Book |
| PP05 | 09 Nov 2020 | 20 Nov 2020 | Bangkok | US$ 7500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
