Layout and Design of Process Plant Equipment and Piping
Designing process plants is a complex and demanding process. The design of plant layout is one of the most important tasks before plant construction. A successful plant layout will not only reduce capitalized cost, but also help to improve the safety of the plant and reduce its environmental impact. Additionally, easy access to individual items of plant equipment is essential for effective operation and maintenance.
This course will familiarize participants with all aspects of process plant major equipment and piping systems including the following topics: preliminary sizing and mechanical design of process equipment; equipment configuration; development of plot plans; multi-objectives and optimization of plant layout; layout, design procedures, and practices involved in the location of equipment and layout of associated piping systems; operability, maintainability, safety and environmental implications, and compliance with applicable regulations, codes and standards. The course will discuss methods for achieving a business-focused facility and minimizing life-cycle costs, highlighting effective interaction between various engineering disciplines (civil, electrical, mechanical, instrumentation, and control). The main aim of this course is to familiarize participants with all aspects of piping systems and the key aspects of the layout and design of process equipment and piping systems.
By the end of this course delegates will know about:
Engineers and designers involved in plant design activities; project engineers; process engineers, piping fabricators, contractors, and suppliers; piping design and analysis personnel; and, recent engineering graduates in all disciplines
· Design and Layout Fundamentals
· Process Plant Design
· Key Considerations Affecting Plant Process Design and Layout
· Layout Design: General Philosophy and Principles
· Process Equipment Sizing and Design
· Layout Planning and Procedures
· Piping Fundamentals
· Additional Layout and Design Requirements of Piping Systems
· Basic Design of Piping Systems
· Piping Thermal Expansion and Flexibility
· Pipe Supports and Restraints
· Introduction to Pipe Stress Analysis (ASME B31.3)
· Pressure Vessels and Reactors
· Atmospheric Storage Tanks
· Fired Heaters & Heat Exchangers & Pumps
· Compressors, Blowers, and Fans
· Gas Turbines & Steam Turbines
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| PP23 | 13 Jan 2020 | 17 Jan 2020 | Barcelona | US$ 5500 | Book |
| PP23 | 08 Mar 2020 | 12 Mar 2020 | Alexandria | US$ 3900 | Book |
| PP23 | 18 May 2020 | 22 May 2020 | Kuala Lumpur | US$ 4500 | Book |
| PP23 | 26 Jul 2020 | 30 Jul 2020 | Dubai | US$ 4200 | Book |
| PP23 | 14 Sep 2020 | 18 Sep 2020 | California | US$ 5500 | Book |
| PP23 | 02 Nov 2020 | 06 Nov 2020 | Istanbul | US$ 4500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
