Search

Seminars

Introduction to Maintenance of Aboveground Atmospheric Storage Tanks (API 653)

Introduction:

API 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January, 1991. Its scope encompasses the maintenance, inspection, repair, alteration, relocation and reconstruction of existing, above ground, atmospheric storage tanks constructed per API 650, or its predecessor API 12C. If API 653 is intended to cover existing storage tanks, why should it be considered in the design of new storage tanks? For one simple reason: Ignoring API 653 when developing the design requirements for a new storage tank could result in operating or maintenance penalties later.

API 650 requires a minimum bottom plate thickness of 0.25 in. It does not mandate an internal lining, cathodic protection system, nor secondary containment and leak detection system. An owner wants to maximize the required interval between internal inspections, typically targeting for 10 years. The owner will typically be able to estimate anticipated corrosion rates for both the liquid and soil sides of the tank based on past experience. The question that must be answered is whether a standard API 650 tank design is acceptable, considering API 653 requirements and the owner's maintenance, inspection planning and operational requirements.

Course Objectives:

By the end of this course delegates will be able to:

· Gain an overall understanding of the maintenance requirements of aboveground atmospheric storage tanks in accordance with API-653

Who Should Attend?

Engineers, Supervisors, Inspectors, Maintenance Personnel and individuals who have engineering, inspection, maintenance and management responsibility related to aboveground atmospheric storage tanks that store hydrocarbon liquids

Course Outline:

Introduction to API-653

· Scope of API-653

· Definitions

· Starting an API-653 Compliance Program

· Cost of an API-653 Compliance Program

Tank Inspection

· Objectives

· Prioritization

· Inspection Frequencies

· Record Keeping

· Inspector Qualification

Tank Component Evaluation

· Shell

· Bottom

· Nozzles

· Roof

· Foundation

· Shell and Bottom Settlement

Leak Detection Methods

Tank Repair and Alteration

· General Considerations

· Material Considerations

· General Requirements for Repair and Alteration

· Removal, Repair and Replacement of Shell Plate Material

· Repair, Addition, Replacement and Alteration of Shell Penetrations

· Repair of Tank Bottoms

· Tank Roof Repair

Dismantling and Reconstruction

· Dismantling Methods

· Reconstruction

· Dimensional Tolerances

Examination and Testing

· General

· Welding Inspection

· Hydrostatic Testing

COURSE LOCATIONS

Code From To City Fee
CS03 27 Jan 2020 31 Jan 2020 Los Angeles US$ 5500 Book
CS03 09 Mar 2020 13 Mar 2020 Istanbul US$ 4500 Book
CS03 04 May 2020 08 May 2020 Barcelona US$ 5500 Book
CS03 05 Jul 2020 09 Jul 2020 Cairo US$ 3900 Book
CS03 06 Sep 2020 10 Sep 2020 Dubai US$ 4200 Book
CS03 02 Nov 2020 06 Nov 2020 Kuala Lumpur US$ 4500 Book


DUBAI OFFICE

Ittihad Deira Building,
Al Ittihad Rd, Deira
Dubai,
UAE

info@petrogas-training.com

USA OFFICE

642 E14 Street,
10009-13 Manhattan,
New York (NY)
USA

info@petrogas-training.com

EGYPT OFFICE

52 General Kamal Hejab Street,
Suez Bridge,
Cairo,
Egypt

info@petrogas-training.com
 

COURSE CERTIFICATE

Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.


TRAINING HOURS

Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.


TRAINING METHODOLOGY

We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.


ASSESSMENT & EVALUATION

Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.


ORGANIZATIONAL IMPACT

A- Have staff trained in the latest training and development approaches

B- Support nationalization and talent management initiatives

C- Have properly trained and informed people who will be able to add value

D- Gain relevant technical knowledge, skills and competencies


PERSONAL IMPACT

A- Develop job related skills

B- Develop personal skills in subject matter

C- Have a record of your growth and learning results

D- Bring proof of your progress back to your organization

F- Become competent, effective and productive

G- Be more able to make sound decisions

H- Be more effective in day to day work by mastering job-related processes

I- Create and develop competency to perform job well


FREQUENT NOMINATIONS SCHEME

A- 10% discount after 05 candidates’ registration.

B- 15% discount after 10 candidates’ registration.    

C- 20% discount after 20 candidates’ registration.

D- 25% discount after 25 candidates’ registration.

E- 30% discount after 30 candidates’ registration

F- Higher discount rates will be offered based on work volume with different clients.  


SEVERAL NOMINATIONS ON THE SAME COURSE SCHEME

A- One extra free seat is offered on 4 candidates on the same course and dates.

B- Two extra free seats are offered on 6 candidates on the same course and dates.

C- Three extra free seats are offered on 8 candidates on the same course and dates.

D- Four extra free seats are offered on 10 candidates on the same course and dates.

E- Five extra free seats are offered on 12 candidates on the same course and dates.


REGISTRATION POLICY

Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s). 


CANCELLATION POLICY

If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.


PAYMENT POLICY

Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.


COPYRIGHT

© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.