Instrument Measurement Concepts
& Controlling System
Introduction:
This course will cover areas pertaining to
the instrumentation, basic concept of control system and components (sensors,
input/output elements, controllers, final control elements) of surface
facilities. Specific instrumentation and controls for pressure,
temperature, flow, level, density, control valve, and field data acquisition
systems will be covered. This course will go on to explain the basic
working principles, measuring devices, operations, and specifications of
surface facilities. The candidates will undergo introduction to standards,
abbreviation and symbols used in the oil and gas industry, the process control
basic and the components of the control system as well as discussions on main
process variables measured to control the processes.
It will concentrate on the technologies and
component of the pressure control system, sensors, transmitters, and
controllers, a discussion over actuated valve engineering, interpretation of the
control valve function, sizing the valve, and the selection of the valve.
Moreover; it will focus on the elements of the temperature measurement and
control system, technologies, principles of measurement and range operation. It
will also shed light on level measurement and control system which including
the classification, principles, and range of operation of it.
The main elements of measurement and control
system of the liquid flow rate will be fully explored. Emphasis is provided on
the flow metering technologies, principles of measurement and range operation.
The description and use of the gas flow rate metering system and control,
as in the liquid flow rate part, emphasis will be on flow metering
technologies, principles of measurement and range operation. Finally, you will
be introduced to the concept of PLC, DCS and SCADA.
Course Objectives:
By the end of
this course delegates will be able to:
· Gain an
understanding of automation control & process characteristics
· Determine
application of various type of measurement devices & control equipment’s
· Determine
relevant industry codes , standards , documents and guidelines to apply
· Have a
state-of-the-art knowledge about instrumentation & control valves
· How to
install process equipment correctly
· How to
troubleshoot instrumentation systems and control valves
· Correctly
select and size control valves for industrial use
· Correct
maintenance procedures
· Establish
& documenting calibrating procedures
· Learn
about PLC, DCS & SCADA
· Troubleshoot problems of equipment
Who Should Attend?
Process Engineers, Mechanical Engineers,
Shift Supervisors, Electrical Engineers & Technicians, Instrumentation and
Control Engineers & Foremen and Surface Facilities Project Engineers &
Technicians
Course Outline:
Measurement, Instrumentation & Controls
· Standard instrument symbols and abbreviations
· Process control basics
· Measurements of process variables
Pressure Control System & Control Valves
· Pressure control devices
· Sensors and transmitters
· Controllers and control valves
Level and Temperature Control Systems
· Measurement instruments
· Classifications
· Range of operations
Flow Rate Control System: Gas & Liquid
· Liquid flow rate metering and control system
· Gas flow rate metering and control system
PLC, DCS & SCADA
· Local control systems
· DCS
· SCADA
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| INST29 | 26 Jan 2020 | 30 Jan 2020 | Dubai | US$ 4200 | Book |
| INST29 | 02 Mar 2020 | 06 Mar 2020 | Istanbul | US$ 4500 | Book |
| INST29 | 25 May 2020 | 29 May 2020 | Kuala Lumpur | US$ 4500 | Book |
| INST29 | 26 Jul 2020 | 30 Jul 2020 | Sharm el Sheikh | US$ 4000 | Book |
| INST29 | 14 Sep 2020 | 18 Sep 2020 | Orlando | US$ 5500 | Book |
| INST29 | 16 Nov 2020 | 20 Nov 2020 | Paris | US$ 5500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
