Industrial Welding Skills & Practices 3
Introduction:
This course will enable the candidates to recognize and apply proper fundamentals of shielded arc metal welding. The candidates will weld steel in all applicable positions with several types of electrodes, emphasizing fundamentals and procedure. The candidates will apply proper safety practices throughout the course. The fundamental skills acquired in this course will affect the candidates’ workplace outcomes throughout their careers. Intrinsic core abilities will have long- term economic impact upon the candidates’ earning capacity.
Course Objectives:
By the end of this course delegates will be able to:
· Demonstrate safety in the use of shielded metal arc welding
· Demonstrate basic shielded metal arc welding skills using a variety of different electrodes primarily through booth exercises and shop experiences
· Explain the fundamental theories of shielded metal arc welding
· Learn to perform specific welding procedures according to the American Welding Society (AWS) standards
· Perform a specific AWS testing procedure selected by the department
· Perform specific weld profiles with various electrodes in the flat welding position
· Perform specific weld profiles with various electrodes in the vertical welding position
· Perform specific weld profiles with various electrodes in the overhead welding position
Who Should Attend?
Welders I & II, Fabricators, Welding Metallurgy Technicians, Welding Supervisors, Welding Sales/Service Technicians, Foreman Mechanical Maintenance, Engineering Technicians, Pipefitters, Weld Inspectors, Production Welders, Managers, Petroleum Engineers, Senior Welders and Operators, Production and Maintenance Staff, Inspectors, anyone who works with welding
Course Outline:
Safety in the Welding Shop
· Accidents
· General shop safety
· Safety in the welding environment
· Oxy-fuel Gas Welding and cutting safety
· Arc welding and cutting safety
· Resistance welding safety
· Safety around welding robots
· Special welding process safety
Shielded Metal Arc Welding Equipment and Supplies
· Arc welding power source classifications
· Constant current power sources
· NEMA arc welding power source classifications
· Welding leads
· SMAW electrodes
· Carbon and low-alloy steel covered electrode classification
· Non-ferrous electrode classifications
· Electrodes care
· Power source remote controls
· Weld-cleaning equipment
· Shields and helmets
· Special arc welder clothing
Shielded Metal Arc Welding
· Direct Current (DC) arc welding fundamentals
· DCEN and DCEP fundamentals
· Alternating Current (AC) arc welding fundamentals
· Selecting an arc welding machine
· Starting, stopping, and adjusting the Arc Welding Power Source (SMAW)
· DC arc blow
· Arc welded joint designs
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| WT14 | 24 Feb 2020 | 06 Mar 2020 | Guangzhou | US$ 8500 | Book |
| WT14 | 27 Apr 2020 | 08 May 2020 | Hong Kong | US$ 8500 | Book |
| WT14 | 14 Jun 2020 | 25 Jun 2020 | Alexandria | US$ 6500 | Book |
| WT14 | 24 Aug 2020 | 04 Sep 2020 | Barcelona | US$ 8500 | Book |
| WT14 | 05 Oct 2020 | 16 Oct 2020 | Vienna | US$ 9500 | Book |
| WT14 | 13 Dec 2020 | 24 Dec 2020 | Dubai | US$ 7000 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
