Industrial Flow Measurement for Engineers & Technicians
Introduction:
Industrial flow measurement is suitable for the engineer, electrician, technician, craftsperson, operator and others who require practical, specialist knowledge for selecting and implementing flow measurement systems. This course is ideal for cross-skill training. The course focuses on typical real-world applications. Close attention is given to special installation considerations and application limitations when selecting and installing different flow instruments.
Course Objectives:
By the end of this course delegates will be able to:
Who Should Attend?
Automation engineers, building service designers, control technicians, data systems planners and managers, electrical and instrumentation technicians, electrical engineers, power system protection and control engineers, process engineers, electricians, energy management consultants, instrumentation and control engineers, maintenance engineers, anyone involved in the design, implementation and upgrading of industrial control systems
Course Outline:
Basic Properties of Fluids
· Basic fluid properties
· Non-Newtonian fluids
· Velocity profiles
· Reynolds number
· Flow measurement
· Mass flow rate, Multi-phase flows
Positive Displacement Meters
· Introduction, Sliding vane
· Oval gear meters
· Lobed impeller, Oscillating piston
· Nutating disc
Inferential Meters
· Turbine meter
· Woltman meter , Propeller type
· Impeller meters
· Installation recommendations
Oscillatory Flow Meters
· Primary devices, Sensors
· Application guidelines for vortex flow metering
· Avoiding problems
Differential Pressure Meters
· Basic theory, Orifice plate, Tapping points
· Venturi tube meter, Venturi and flow nozzles
· The Dall tube. Target meter, Pitot tube
· Point averaging, Elbow
· Troubleshooting
Variable Area Meters
· Operating principle, Floats, Metering tube
Electromagnetic Flowmeters
· Measuring principle
· Construction, Conductivity
· Field characterization
· Measurement in partially filled pipes
· Empty pipe detection, Field excitation
· The pulsed DC field
· Bipolar pulse operation, Meter sizing
Ultrasonic Flowmeters
· Doppler method, Transit time meter
· Flow profile
· Frequency difference
· Clamp on instruments
· Velocity of sound measurement
· Factors influencing the velocity of sound
· Beam scattering
· Advantages, Disadvantages
· Application limitations
Mass Flow Measurement
· The Coriolis force
· A practical system
· Multiple phase flow
· Density measurement
· Loop arrangements
· Straight through tube
· Application in the food industry
· Applications in the chemical industry
· Summary of Coriolis mass measurement
· Thermal mass meters
Open Channel Flow Measurement
· The weir, The flume
· Level measurement, Linearisation
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| INST19 | 27 Jan 2020 | 07 Feb 2020 | Tokyo | US$ 9500 | Book |
| INST19 | 15 Mar 2020 | 26 Mar 2020 | Riyadh | US$ 7000 | Book |
| INST19 | 18 May 2020 | 29 May 2020 | Milan | US$ 8500 | Book |
| INST19 | 27 Jul 2020 | 07 Aug 2020 | Geneva | US$ 9500 | Book |
| INST19 | 21 Sep 2020 | 02 Oct 2020 | Singapore | US$ 8500 | Book |
| INST19 | 08 Nov 2020 | 19 Nov 2020 | Amman | US$ 7000 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
