Gas Turbine Mechanical Maintenance
Introduction:
This course is
an ideal course for those engineers/technicians wishing to gain a more detailed
understanding of the mechanical design and maintenance activities associated
with Gas Turbines. Together with a detailed examination of the major systems of
a Gas Turbine this course also discusses the different maintenance approaches
along with a description of the mechanical aspects of the typical Gas Turbine
Inspections. Presenting this course at our Masaood John Brown Gas Turbine
Maintenance/Repair facility will allow attendees to see practical examples of
Gas Turbine Components, types of component faults and associated repair
techniques.
Course
Objectives:
By the end of
this course delegates will be able to:
· Gain a detailed understanding of the mechanical
maintenance activities associated with gas turbines
· Be able to describe the systems associated with
a modern gas turbine
Who
Should Attend?
Electrical Engineers, Power Generation
Engineers, Mechanical Maintenance Personnel, Power System Protection Engineers,
Gas turbine newcomers and more experienced persons who desire an overview of
the many available gas turbine technologies, Process Control Engineers &
Personnel, Electrical and Instrumentation Technicians & Design Engineers, Maintenance
Technicians & Supervisors, Plant Operators & Technicians, Oil & Gas
Industry Personnel
Course
Outline:
Introduction
Gas Turbine Components
· Major Components of a Gas Turbine
· Major Accessory Components of a Gas Turbine
Maintenance of Gas Turbine
Systems
· Lube Oil System Description/Maintenance
· Hydraulic Oil System Description/Maintenance
· Fuel Systems Description/Maintenance
· Starting Systems Description/Maintenance
· Cooling and Sealing Air Description/Maintenance
· Additional Systems Description/Maintenance
Routine Inspections
Inspection Scheduling
Combustion Inspection
· Disassembly/Reassembly Procedures
· Inspection Procedures
· Criteria for re-use
· Repair or Replacement
Hot Gas Path Inspection
· Disassembly/Reassembly Procedures
· Inspection Procedures
· Criteria for re-use
· Repair or Replacement
Major Inspection
· Disassembly/Reassembly Procedures
· Alignment Checks
· Inspection of Bearings/Seals and Journals
Evaluation of Maintenance
Techniques
· Breakdown Maintenance
· Scheduled Maintenance
· Preventative Maintenance
Factors Affecting Component
Lifespan
Component Repair and Repair Technology
Code | From | To | City | Fee | |
---|---|---|---|---|---|
PG06 | 03 Feb 2020 | 14 Feb 2020 | Kuala Lumpur | US$ 7500 | Book |
PG06 | 13 Apr 2020 | 24 Apr 2020 | Istanbul | US$ 7500 | Book |
PG06 | 01 Jun 2020 | 12 Jun 2020 | Milan | US$ 8500 | Book |
PG06 | 03 Aug 2020 | 14 Aug 2020 | Sydney | US$ 9500 | Book |
PG06 | 04 Oct 2020 | 15 Oct 2020 | Cairo | US$ 6500 | Book |
PG06 | 06 Dec 2020 | 17 Dec 2020 | Dubai | US$ 7000 | Book |
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.