Gas Transmission & Distribution
Piping Systems
(Conforms to ASME Code B31.8)
Introduction:
ASME B31.8 is the most widely used Code for the design,
operation, maintenance, and repair of natural gas distribution and transmission
pipelines. This course explains the present-day piping Code provisions,
the principal intentions of the Code, and how the Code should be used.
The emphasis is on transmission pipelines.
Course
Objectives:
By the end of
this course delegates will be able to:
· Explain the
causes and modes of pipeline failure
· Describe the
considerations for material specifications, pipe manufacturing, and pipe
joining
· Estimate
pipeline stresses from external loadings
· Explain how to
evaluate pipeline defects
· Identify
pipeline repair techniques
· Identify the
elements of pipeline integrity
· Explain how
code requirements address these issues
· Explain the
differences between B31.8 and US DOT gas pipeline regulations
Who
Should Attend?
Engineers;
Code compliance personnel; Operation and Maintenance Personnel; Regulatory
Personnel
Course
Outline:
Introduction
· Piping Systems Definitions
· Piping Systems Component Definitions
· Design, Fabrication, Operation, and Testing Terms and Definitions
· Quality Assurance
Materials and Equipment
· Materials and Equipment
· Qualification of Materials and Equipment
· Materials for Use in Low Temperature Applications
· Marking & Material Specifications
· Equipment Specifications
· Transportation of Line Pipe
· Conditions for the Reuse of Pipe
Welding
· Introduction to Welding, Preparation for Welding
· Qualification of Procedures and Welders
· Preheating, Stress Relieving
· Weld Inspection Requirements
· Repair or Removal of Defective Welds
Piping System Components and
Fabrication Details
· Piping System Components and Fabrication Details
· Piping System Components
· Expansion and Flexibility
· Design for Longitudinal Stress
· Supports and Anchorage for Exposed Piping
· Anchorage for Buried Piping
Design, Installation, and Testing
· Design, Installation, and Testing
· Steel Pipe Other Materials, Compressor Stations
· Pipe-Type and Bottle-Type Holders
· Control and Limiting of Gas Pressure
· Valves & Vaults Customers Meters and Regulators
· Gas Service Lines
Operating and Maintenance
Procedures
· Operating and Maintenance Procedures Affecting the
· Safety of Gas Transmission and Distribution Facilities
· Pipeline Maintenance
· Distribution Piping Maintenance
· Pipeline Service Conversions
Corrosion Control
· Principles of Corrosion Control
· External Corrosion Control for Steel Pipelines
· Cathodic Protection Criteria
· Operation and Maintenance of Cathodic Protection Systems
· Internal Corrosion Control
· Steel Pipelines in Arctic Environments
· Steel Pipelines in High-Temperature Service
· Stress Corrosion and Other Phenomena
· Cast Iron, Wrought Iron, Ductile Iron, and Other Metallic
Offshore Gas Transmission
· Offshore Gas Transmission
· Offshore Gas Transmission Terms and Definitions
· Qualification of Materials and Equipment
· Material Specifications
· Conditions for the Reuse and Requalification of Pipe
· Welding Offshore Pipelines
· Stress Relieving
· Inspection of Welds
· Piping System Components and Fabrication
· Design, Installation, and Testing
· Operating and Maintenance Procedures Affecting the Safety of Gas
Transmission Facilities
· Pipeline Maintenance
· Corrosion Control of Offshore Pipelines
· External Corrosion Control
· Cathodic Protection Criteria
· Internal Corrosion Control
Sour Gas Service
· Sour Gas Service, Material Specifications
· Welding Sour Gas Pipelines Preparation for Welding
· Qualification of Procedures and Welders
· Preheating, Stress Relieving
· Welding and Inspection Tests
· Piping System Components Design and Fabrication Details
· Testing Sour Gas Pipelines
· Pipeline Maintenance
· Corrosion Control of Sour Gas Pipelines
· External Corrosion Control for Steel Pipelines
· Internal Corrosion Control
· Stress Corrosion and Other Phenomena
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| PP08 | 16 Feb 2020 | 27 Feb 2020 | Cairo | US$ 6500 | Book |
| PP08 | 20 Apr 2020 | 01 May 2020 | Kuala Lumpur | US$ 7500 | Book |
| PP08 | 14 Jun 2020 | 25 Jun 2020 | Dubai | US$ 7000 | Book |
| PP08 | 03 Aug 2020 | 14 Aug 2020 | Istanbul | US$ 7500 | Book |
| PP08 | 19 Oct 2020 | 30 Oct 2020 | Madrid | US$ 8500 | Book |
| PP08 | 06 Dec 2020 | 17 Dec 2020 | Alexandria | US$ 6500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
