Search

Seminars

Gas Lift System Production Optimization

Introduction:

This course addresses various areas of gas lifting operations. It gives a complete look on the operational activities which will enable field operators to fully optimize even from systems selection, design, and installation. Moreover, the course will then focus on the techniques in achieving production optimization, specifically with continuous flow installations, monitoring, and run-life optimization. In order to achieve optimal levels of production, NODAL analysis will be used in order to analyze and troubleshoot gas lifted wells. Class exercises and case studies will also be presented in order to test the candidates’ application of the concepts learnt in the course into situational instances of field operations.

The objective of this course is to provide comprehensive coverage of Gas Lift design in Production Optimization. The latest technology multi-phase flow and inflow well performance is covered. Continuous flow and intermittent lift including valve mechanics are emphasized. Theory and applications are balance throughout. Example problems are discussed and others worked out by participants.

Course Objectives:

By the end of this course delegates will be able to:

Understand the techniques in gas lift system operations to achieve production
Learn to optimize production through gas lift system design, analysis, and troubleshooting
Apply techniques in gas lift operations from beginning to end of operations
Manage challenging environment faced by gas lifted wells
Overcome the limitations and problems faced in applying these optimization techniques
Optimize operations through understanding gas lifting’s role in the whole production system
Gain practical skills in valve mechanics and NODAL analysis
Integrate gas lift system best operation practices with production optimization

Who Should Attend?

Drilling Engineers, Senior Drilling Engineers, Drilling Supervisors, Workover Engineers, Petroleum Engineers, Completion Engineers, Tool Pushers, Reservoir and Senior Reservoir Engineers, Geologists, Production Engineers & technologists, Wellsite Engineers, Lifting Personnel, Maintenance Engineers, Foremen, Industry Personnel

Course Outline:

· Artificial Lift Methods

· Multiphase Flow in Oil Wells

· Basics of Nodal Analysis

· Gas Lift Installation Types

· Gas Lift Valves & Construction

· Design and Operation

· Temperature and Effect on the Design

· Setting and Testing

· Continues Vs Intermittent Gas Lift

· Operating Principles and Unloading

· Valve Spacing

· Optimization

· Design of Continuous Flow Gas Lift Installations

· Inflow Performance (IFP)

· Reservoir Deliverability

· Productivity Index and Vogel IPR

· Effect of Reservoir Pressure and Water Cut

· New Developments in Gas Lifting

· NODAL Analysis of Continuous Flow Gas Lifted Wells

· Optimization of Continuous Flow Gas Lift Installations

· Unloading Design for Continuous Flow

· Gas Lift Systems

· Reciprocating Rod Lift

· Progressing Cavity Pumping

· Hydraulic Pumping

· Electrical Submersible Pumping

· Plunger and Capillary System

· Analysis and Troubleshooting Continuous Flow Gas Lift Wells

· Well Application and Trouble Shooting

COURSE LOCATIONS

Code	From	To	City	Fee
DE12	17 Feb 2020	28 Feb 2020	Istanbul	US$ 7500	Book
DE12	20 Apr 2020	01 May 2020	Barcelona	US$ 8500	Book
DE12	08 Jun 2020	19 Jun 2020	Jakarta	US$ 8500	Book
DE12	02 Aug 2020	13 Aug 2020	Dubai	US$ 7000	Book
DE12	04 Oct 2020	15 Oct 2020	Cairo	US$ 6500	Book
DE12	21 Dec 2020	01 Jan 2021	Kuala Lumpur	US$ 7500	Book

DUBAI OFFICE

Ittihad Deira Building,
Al Ittihad Rd, Deira
Dubai,
UAE
info@petrogas-training.com

USA OFFICE

642 E14 Street,
10009-13 Manhattan,
New York (NY)
USA
info@petrogas-training.com

EGYPT OFFICE

52 General Kamal Hejab Street,
Suez Bridge,
Cairo,
Egypt
info@petrogas-training.com

COURSE CERTIFICATE

Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.

TRAINING HOURS

Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.

TRAINING METHODOLOGY

We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.

ASSESSMENT & EVALUATION

Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.

ORGANIZATIONAL IMPACT

A- Have staff trained in the latest training and development approaches

B- Support nationalization and talent management initiatives

C- Have properly trained and informed people who will be able to add value

D- Gain relevant technical knowledge, skills and competencies

PERSONAL IMPACT

A- Develop job related skills

B- Develop personal skills in subject matter

C- Have a record of your growth and learning results

D- Bring proof of your progress back to your organization

F- Become competent, effective and productive

G- Be more able to make sound decisions

H- Be more effective in day to day work by mastering job-related processes

I- Create and develop competency to perform job well

FREQUENT NOMINATIONS SCHEME

A- 10% discount after 05 candidates’ registration.

B- 15% discount after 10 candidates’ registration.

C- 20% discount after 20 candidates’ registration.

D- 25% discount after 25 candidates’ registration.

E- 30% discount after 30 candidates’ registration

F- Higher discount rates will be offered based on work volume with different clients.

SEVERAL NOMINATIONS ON THE SAME COURSE SCHEME

A- One extra free seat is offered on 4 candidates on the same course and dates.

B- Two extra free seats are offered on 6 candidates on the same course and dates.

C- Three extra free seats are offered on 8 candidates on the same course and dates.

D- Four extra free seats are offered on 10 candidates on the same course and dates.

E- Five extra free seats are offered on 12 candidates on the same course and dates.

REGISTRATION POLICY

Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).

CANCELLATION POLICY

If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.

PAYMENT POLICY

Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.

COPYRIGHT

© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.