Fundamentals of Welding Engineering
(AWS/ASME)
Introduction:
The course
covers the basic science and practical application of the most commonly utilized
welding processes along with other essential topics such as: welding
terminology, weld design, welding safety, electrical theory, the weldability of
metals, and welding quality control. This course is designed for the individual
that needs to expand the candidates’ core competence on the subject of welding.
Designers, inspectors, managers, or welders with a need to understand the
fundamentals of welding benefit from the practical aspects of welding
technology offered here.
To introduce
the various welding and cutting processes, this course gives an understanding
of AWS filler metals specifications, types of welding flaws, related ASME
Section V requirements for NDE, and the QA systems necessary for welder
performance qualification. This course is also an excellent learning experience
for people seeking a general knowledge in welding and related NDE.
Course
Objectives:
By the end of this course delegates will be able to:
· Learn about the
fundamentals of welding engineering conforming to AWS and ASME standards and
codes
Who
Should Attend?
Inspectors, welders, welding supervisors, quality control personnel, technologists, and engineers involved with welding for new fabrication, repairs, maintenance, and inspection for pressure vessel or piping.TOPICS
Course
Outline:
Introduction to Arc Welding
Processes
Terms and Definitions
Welding, Brazing and NDT Symbols
Welding Hazards and Accident
Prevention
Welding Metallurgy
Shielded metal arc welding (SMAW)
· Gas tungsten arc welding (GTAW)
· Gas metal arc welding (GMAW)
· Submerged arc welding (SAW)
· Flux-cored arc welding (FCAW)
· Selection of arc welding
processes
· Advantages and limitations of
each process
Introduction to Cutting Processes
· Principles of operation,
equipment, application, and metallurgical effects of the following metal
cutting processes
· Oxygen cutting
· Air-carbon-arc cutting and
gouging
· Plasma-arc cutting
· Carbon-arc cutting
AWS Welding Filler Metal
Specifications in ASME Sec. II Part C
· SFA-5.1/SFA-5.1M Carbon Steel
Electrodes for Shielded Metal Arc Welding
· SFA-5.4/SFA-5.4M Stainless Steel
Electrodes for Shielded Metal Arc Welding
· SFA-5.5/SFA-5.5M Low-Alloy Steel
Electrodes for Shielded Metal Arc Welding
· SFA-5.9/SFA-5.9M Bare Stainless
Steel Welding Electrodes and Rods
· SFA-5.11/SFA-5.11M Nickel and
Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
· SFA-5.12/SFA-5.12M Tungsten and
Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting
· SFA-5.14/SFA-5.14M Nickel and
Nickel-Alloy Bare Welding Electrodes and Rods
· SFA-5.17/SFA-5.17M Carbon Steel
Electrodes and Fluxes for Submerged Arc Welding
· SFA-5.18/SFA-5.18M Carbon Steel
Electrodes and Rods for Gas Shielded Arc Welding
· SFA-5.22 Stainless Steel
Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for
Gas Tungsten Arc Welding
Introduction to NDE Fundamentals
and ASME Section V
· The applications, examination
processes, requirements, uses, benefits, limitations, personnel qualifications,
physical weld defects, and acceptance criteria of the following NDE methods as
detailed in
· ASME Section V:
· Visual examination
· Radiographic examination
· Ultrasonic examination
· Liquid penetrant examination
· Magnetic particle examination
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| CS10 | 17 Feb 2020 | 21 Feb 2020 | London | US$ 5000 | Book |
| CS10 | 26 Apr 2020 | 30 Apr 2020 | Cairo | US$ 3900 | Book |
| CS10 | 21 Jun 2020 | 25 Jun 2020 | Dubai | US$ 4200 | Book |
| CS10 | 10 Aug 2020 | 14 Aug 2020 | Bangkok | US$ 4500 | Book |
| CS10 | 19 Oct 2020 | 23 Oct 2020 | Kuala Lumpur | US$ 4500 | Book |
| CS10 | 21 Dec 2020 | 25 Dec 2020 | Istanbul | US$ 4500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
