Search

Seminars

EOR, Drilling & Well Completion Operations



Introduction:


 
This course is primarily designed for drilling, production and completion engineers and supervisors needing a practical understanding and an appreciation of well completion design and operation, well stimulation and work over planning. It explains how completion configurations are varied to meet well objectives and to maximize well productivity. Design concepts and methods are presented together with downhole tools and their selection criteria.
 
Completion types and design for vertical, horizontal and multilateral wells, design and optimization of tubing based on tubing performance analysis (Inflow performance analysis, liquid and gas hold up during fluid flow and forces on tubing), downhole equipment, tubing accessories, and wellhead equipment including completion. Also fluid flow through perforations and perforation techniques; communication tests; wireline operations; reservoir stimulation; and hydraulic fracture treatment design and optimization are extensively reviewed. Local case studies are also provided.
 
This course will illustrate in details about casing, tubing accessories and completion types. Also completion equipment design, operations and well productivity. The primary focus of this course is to enhance the candidates’ knowledge, skills and attitudes necessary to understand well completion technology.
 

Course Objectives:


Enhanced Oil Recovery Fundamental Processes
 
  • EOR: What, why and how?
  • Screening criteria
  • Viscous, capillary and gravity forces
  • Pore scale trapping / displacement
  • Mobilization of trapped oil
  • Phase mobility
  • Geologic factors in EOR
  • Areal and vertical sweep efficiencies
  • Displacement efficiencies
  • Fractional flow theory and linear displacement
  • Buckley Leverett and Welge solutions
  • Casing & Tubing Introduction
  • Manner of manufacture
  • Type of joints
  • Length range
  • Wall thickness
  • Well Completion Type
  • Open hole
  • Cased hole
  • Slotted liner
  • Single completion & double
 
Completion Equipment & Design Practices
 
  • · Well head
  •  
  • · Safety valves
  •  
  • · Slide side door and circulation device
  •  
  • · Permanent and packer
  •  
  • Completion Operation
  •  
  • · Cementing primary and multistage
  •  
  • · Remedial
  •  
  • · Cased hole log
  •  
  • · Depth control
  •  
  • · Cement bond evaluation
  •  
  • Completion Productivity
  •  
  • · Sizing the tubing & performance
  •  
  • · Artificial lift requirement
  •  
  • · Perforation and selection
  •  
  • · Completion fluids
  •  
  • · Case Studies

Who Should Attend?


Drilling Engineers, Senior Drilling Engineers, Drilling Supervisors, Petroleum Engineers, Completion Engineers, Senior Completion Engineers, Tool Pushers, Reservoir and Senior Reservoir Engineers, Geologists, Production Engineers, Foremen, Industry Personnel

Course Outline:


Enhanced Oil Recovery Fundamental Processes

· EOR: What, why and how?

· Screening criteria

· Viscous, capillary and gravity forces

· Pore scale trapping / displacement

· Mobilization of trapped oil

· Phase mobility

· Geologic factors in EOR

· Areal and vertical sweep efficiencies

· Displacement efficiencies

· Fractional flow theory and linear displacement

· Buckley Leverett and Welge solutions

Casing & Tubing Introduction

· Manner of manufacture

· Type of joints

· Length range

· Wall thickness

Well Completion Type

· Open hole

· Cased hole

· Slotted liner

· Single completion & double

Completion Equipment & Design Practices

· Well head

· Safety valves

· Slide side door and circulation device

· Permanent and packer

Completion Operation

· Cementing primary and multistage

· Remedial

· Cased hole log

· Depth control

· Cement bond evaluation

Completion Productivity

· Sizing the tubing & performance

· Artificial lift requirement

· Perforation and selection

· Completion fluids

· Case Studies

COURSE LOCATIONS

Code From To City Fee
DE36 09 Feb 2020 13 Feb 2020 Dubai US$ 4200 Book
DE36 27 Apr 2020 01 May 2020 London US$ 5000 Book
DE36 15 Jun 2020 19 Jun 2020 Bangkok US$ 4500 Book
DE36 09 Aug 2020 13 Aug 2020 Alexandria US$ 3900 Book
DE36 05 Oct 2020 09 Oct 2020 Kuala Lumpur US$ 4500 Book
DE36 20 Dec 2020 24 Dec 2020 Doha US$ 4000 Book


DUBAI OFFICE

Ittihad Deira Building,
Al Ittihad Rd, Deira
Dubai,
UAE

info@petrogas-training.com

USA OFFICE

642 E14 Street,
10009-13 Manhattan,
New York (NY)
USA

info@petrogas-training.com

EGYPT OFFICE

52 General Kamal Hejab Street,
Suez Bridge,
Cairo,
Egypt

info@petrogas-training.com
 

COURSE CERTIFICATE

Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.


TRAINING HOURS

Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.


TRAINING METHODOLOGY

We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.


ASSESSMENT & EVALUATION

Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.


ORGANIZATIONAL IMPACT

A- Have staff trained in the latest training and development approaches

B- Support nationalization and talent management initiatives

C- Have properly trained and informed people who will be able to add value

D- Gain relevant technical knowledge, skills and competencies


PERSONAL IMPACT

A- Develop job related skills

B- Develop personal skills in subject matter

C- Have a record of your growth and learning results

D- Bring proof of your progress back to your organization

F- Become competent, effective and productive

G- Be more able to make sound decisions

H- Be more effective in day to day work by mastering job-related processes

I- Create and develop competency to perform job well


FREQUENT NOMINATIONS SCHEME

A- 10% discount after 05 candidates’ registration.

B- 15% discount after 10 candidates’ registration.    

C- 20% discount after 20 candidates’ registration.

D- 25% discount after 25 candidates’ registration.

E- 30% discount after 30 candidates’ registration

F- Higher discount rates will be offered based on work volume with different clients.  


SEVERAL NOMINATIONS ON THE SAME COURSE SCHEME

A- One extra free seat is offered on 4 candidates on the same course and dates.

B- Two extra free seats are offered on 6 candidates on the same course and dates.

C- Three extra free seats are offered on 8 candidates on the same course and dates.

D- Four extra free seats are offered on 10 candidates on the same course and dates.

E- Five extra free seats are offered on 12 candidates on the same course and dates.


REGISTRATION POLICY

Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s). 


CANCELLATION POLICY

If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.


PAYMENT POLICY

Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.


COPYRIGHT

© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.