Control & Protection Systems of
Gas Turbine
Introduction:
This course presents the features of control and
protection systems as used on gas turbine installations. It enables the
participants to understand and be able to apply the following concepts: the
function of the control system, the control loop, sensing devices, actuators,
controllers, mechanical, electronic, digital, reliability i.e. redundant
(duplicate) equipment, operator interface, display of information, inputting
commands, controlling turbine output - FSR (Fuel Stroke Reference), automatic
start-up sequence, permissive, speed sensors, switches, relays, modes of
control, startup, speed/load, temperature, pre-set FSR, limitations, speed/load
control, governor characteristic, loading rate limitations, automatic shut-down
sequence, spin cooling, fired shut-down, exhaust temperature control,
monitoring thermocouples, spread, monitoring combustion conditions, alarms and
trips, flameout protection, over speed protection, over temperature protection,
vibration protection.
Course
Objectives:
By the end of
this course delegates will be able to:
Who
Should Attend?
Electrical
Engineers, Power Generation Engineers, Power System Protection Engineers, Process
Control Engineers & Personnel, Electrical and Instrumentation Technicians
& Design Engineers, Maintenance Technicians & Supervisors, Plant
Operators & Technicians, Oil & Gas Industry Personnel
Course
Outline:
· The function of the
control system
· The control loop
· Sensing devices
· Actuators
· Controllers,
mechanical, electronic, digital
· Reliability i.e.
redundant (duplicate) equipment
· Operator interface
· Display of
information
· Inputting commands
· Controlling turbine
output - FSR (Fuel Stroke Reference)
· Automatic start-up
sequence
· Permissives
· Speed sensors
· Switches
· Relays
· Modes of control
· Start-up, speed/load
· Temperature
· Pre-set FSR
· Limitations
· Speed/load control
· Governor
characteristic
· Loading rate
limitations
· Automatic shut-down
sequence
· Spin cooling
· Fired shut-down
· Exhaust temperature
control
· Monitoring
thermocouples, spread
· Monitoring combustion
conditions
· Alarms and trips
· Flameout protection
· Over speed protection
· Over temperature
protection
· Vibration protection
Code | From | To | City | Fee | |
---|---|---|---|---|---|
PG16 | 09 Feb 2020 | 20 Feb 2020 | Jeddah | US$ 7000 | Book |
PG16 | 20 Apr 2020 | 01 May 2020 | Bangkok | US$ 7500 | Book |
PG16 | 22 Jun 2020 | 03 Jul 2020 | Madrid | US$ 8500 | Book |
PG16 | 16 Aug 2020 | 27 Aug 2020 | Alexandria | US$ 6500 | Book |
PG16 | 26 Oct 2020 | 06 Nov 2020 | Barcelona | US$ 8500 | Book |
PG16 | 14 Dec 2020 | 25 Dec 2020 | Istanbul | US$ 7500 | Book |
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.