Cementing Operations Best Practices
Cementing is a very important phase of the well construction plan. Operating company personnel must have a good working knowledge of cements, cementing additives and placement procedures. The use of temperature modeling, computer programs used for job design, and placement of the cement has caused some operating companies to retain a cement service company representative on a full time basis to assist in the overall cementing operations. The desire of the operator is 100% of the job success.
This course will cover the importance being placed on the cement sheath integrity during the life of the well. This has required that additional mechanical properties of the set cement be obtained other than the compressive strength. The parameters that the cement sheath will be subjected to must be considered. There are a number of joint industry projects addressing this area of work. The course will cover the use of cement formulations; cement additives, casing hardware, cement blending, on-site mixing equipment and a well-planned job procedure. Cementing guidelines will be covered that aid in overall job performance.
This course presents the basic concepts of primary cementing and illustrates the adverse affects upon well performance of a poor quality primary cement job. Remediation using squeeze cementing techniques are discussed. The physical and chemical properties of cement slurries are reviewed. Cement evaluation techniques are discussed and finally a class project is performed in which the participants actually design a cement job and perform a cement evaluation.
By the end of this course delegates will be able to:
Drilling Engineers, Senior Drilling Engineers, Drilling Supervisors, Workover Engineers, Petroleum Engineers, Completion Engineers, Tool Pushers, Reservoir and Senior Reservoir Engineers, Geologists, Production Engineers, Wellsite Engineers, Foremen, Industry Personnel
· The Overall Cementing Operation
· Primary Cementing Overview
· The Objectives of Primary Cementing
· Remedial Cementing
· Plug Cementing
· The Basics of Cementing Design
· Problems of Zonal Isolation
· Cement Chemistry
· Cementing Materials & Additives
· Implication of Well Integrity on Well Performance
· Implications of Cement Quality on Well Performance
· Sources of Water Influx
· Solutions and Technologies
· Squeeze Cementing
· Overview of Squeeze Cementing
· Methodology, Equipment and Tools
· Example Calculation
· Performance Characteristics of Cement Slurries
· New Technologies in Cementing
· Introduction to Cement Evaluation
· CBL / VDL / USIT
· The use of Cement Additives
· Laboratory Testing
· Casing Hardware
· Cement Sheath Integrity
· Cement Sheath Evaluation
· Mixing Equipment
· Special Cement Systems
· Cement Guidelines
· Current Documents
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| DE44 | 09 Feb 2020 | 13 Feb 2020 | Alexandria | US$ 3900 | Book |
| DE44 | 06 Apr 2020 | 10 Apr 2020 | Istanbul | US$ 4500 | Book |
| DE44 | 22 Jun 2020 | 26 Jun 2020 | Kuala Lumpur | US$ 4500 | Book |
| DE44 | 03 Aug 2020 | 07 Aug 2020 | London | US$ 5000 | Book |
| DE44 | 05 Oct 2020 | 09 Oct 2020 | Bali | US$ 5500 | Book |
| DE44 | 13 Dec 2020 | 17 Dec 2020 | Cairo | US$ 3900 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
