CO2 Operations & Successful Practices
Introduction:
All aspects of CO2 flood operations will be presented including successful operating practices (wellbore management) on production well downhole equipment, artificial lift use, injection well equipment, surface facility equipment, corrosion inhibition treatment, coatings for surface vessels, monitoring, and several examples of process flow by various CO2 operators.
Course Objectives:
By the end of this course delegates will be able to:
Understand and better apply the successful CO2 operations and successful practices
Who Should Attend?
Anyone associated with CO2 production operations will benefit greatly by attending this event especially managers, superintendents, foremen, and engineers. Those who are not directly involved with production operations but want to learn more may want to attend including geologists, geophysicists, reservoir engineers, production accountants, and production administrative and regulatory personnel
Course Outline:
Best Practices to Reduce Well Failure Frequency
· Team involvement
· Management commitment
· Data tracking
· Accountability
Surface Production Operations for CO2 Floods
Surface Production Facilities/Equipment
Free Water Knockouts
Separators
· Test –2 or 3 phase
· Satellite or not
· Other Production Facilities
· Chemical Pumps
· Remote monitoring
Tankage Requirements: Oil and Water
· Surface Tankage Requirements
· Metallurgy/Coatings to be covered later in session.
· Cathodic protection
· Retention
· Filtration
Metering: The Cash Register
· Oil
· Gas
Injection Facilities
Water Cleanup Tankage
Gathering System
Gathering Lines
Injection Pumps
Injection Header Piping
Surface Discharge Operations
Pumps and Discharge Lines
Regulatory Requirements
Recycling Processes
Separation/Dehydration/Compression
Coatings for Corrosion Control in Surface Facilities
Surface Production Operations for CO2 Floods
Process Flow for different Operators
Successful Artificial Lift Practices in CO2 floods
Case Studies
· Methods
· Metallurgical
· Chemical programs
Wellhead Design
Operations, Safety, and What Works
· Wellbore maintenance
· Production
· Injection
· Clean out
· Monitoring injectivity – WI/WO rates
· New Tailpipe Installation
· Artificial lift with CO2
· Safety Practices in CO2 Floods
· Surface
· Well remedial work
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| PF06 | 10 Feb 2020 | 21 Feb 2020 | Istanbul | US$ 7500 | Book |
| PF06 | 13 Apr 2020 | 24 Apr 2020 | California | US$ 9000 | Book |
| PF06 | 08 Jun 2020 | 19 Jun 2020 | Kuala Lumpur | US$ 7500 | Book |
| PF06 | 09 Aug 2020 | 20 Aug 2020 | Dubai | US$ 7000 | Book |
| PF06 | 04 Oct 2020 | 15 Oct 2020 | Cairo | US$ 6500 | Book |
| PF06 | 14 Dec 2020 | 25 Dec 2020 | London | US$ 8000 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
