Boiler & Pressure Vessel: Design
& Fabrication of Pressure Vessels (ASME Section VIII)
Introduction:
Based on the
rules for pressure vessel design and construction, this course is a
comprehensive introduction to the requirements of Section VIII, Division 1
including background, organization, design, materials, fabrication, inspection,
testing and documentation of pressure vessels. The more commonly used
subsections and paragraphs will be covered, and a discussion of individual
problems or situations will be included. This course is intended for beginners,
as well as experienced vessel designers who would like to update their knowledge
of the Code.
Course
Objectives:
By the end of this course delegates will be able to:
· Understand the
background of the Code rules
· Apply the Code
rules to more common design and fabrication situations
· Perform
calculations for some of the loadings and situations not addresses by the Code
· Prepare design
specifications, design reports, Data Reports, and other documentation
Who
Should Attend?
Individuals
involved with the purchase, design, fabrication, or inspection of pressure
vessels. Some degree of technical background will be helpful, but such
individuals are not required to have an Engineering degree or previous work
experience in the subject matter.
Course
Outline:
· Code rules, scope and jurisdiction
· General requirements related to
materials and testing
· Material toughness and impact
testing requirements
· Joint categories and joint
efficiencies
· General requirements related to
stamping, reports, testing, PWHT, tolerances, and NDEs
· Welding requirements
· Committees, operation and voting
procedures
· Editions, addenda and
interpretations
· Design Requirements
· Design loadings and allowable
stresses
· Design criteria and strength theory
for Division 1
· Formulas for internal pressure and
tensile loading
· Procedures for external pressure
(vacuum) and compressive loads
· Openings and reinforcement
· Hydrostatic and pneumatic testing
· Background of the design rules
· Example design problems and
solutions
· cylindrical shells and formed heads
· Seismic loading on vertical vessels
· nozzle reinforcements
· other special components
· External pressure and stiffening
rings
· Reinforced openings and ligament
efficiency
· Open discussion of design problems
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| CS12 | 16 Feb 2020 | 20 Feb 2020 | Sharm el Sheikh | US$ 4000 | Book |
| CS12 | 27 Apr 2020 | 01 May 2020 | London | US$ 5000 | Book |
| CS12 | 15 Jun 2020 | 19 Jun 2020 | Milan | US$ 5500 | Book |
| CS12 | 17 Aug 2020 | 21 Aug 2020 | Manila | US$ 5000 | Book |
| CS12 | 26 Oct 2020 | 30 Oct 2020 | Istanbul | US$ 4500 | Book |
| CS12 | 28 Dec 2020 | 01 Jan 2021 | Kuala Lumpur | US$ 4500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
