Basics of Petrophysics Operations
Introduction:
No amount of
fancy post-processing can really overcome problems caused by data which is bad
from the start. Callibration and other wireline and MWD product quality
problems discovered at the wellsite can usually be rectified. Once a well has
been cased, however, the best a wireline or MWD vendor can offer is discounted
charges and/or credit against future work. We will work with the wellsite staff
and the wireline and/or MWD vendors to ensure that the log data obtained is the
highest quality possible.
This course will
help the candidates understand logging measurements, logging operations, tool
calibration and environmental corrections. The course will focus on log quality
control on tool measurements and handling, data loading and practice
application for curve editing. At the end of the course, the candidates will
have extensive knowledge of well logging and quality data logs.
Course
Objectives:
By the end of
this course delegates will be able to:
Who
Should Attend?
Geologists,
Geophysicists, Petrophysicists, Stratigraphers , Reservoir, Petroleum, Wellsite
Geologists, Petroleum Engineers, Drilling Engineers, Reservoir Engineers,
Production Engineers, Operations Engineers, Technologists, Log Analysts,
E&P Personnel, Exploration & Development Personnel, Geologists,
Reservoir Engineers, Seismic Interpreters, E&P Managers, Data Management
and Oil & Gas Personnel
Course
Outline:
Basics of Open and Cased Hole Logging
· Introduction
· Planning (logging programs and objectives)
· Logging Operation (logging speed, sampling rate, log units, scales, log
presentations, main log and repeat section, depth match, digital data format,
etc)
· Tool Calibration
· Logging Environment
Reservoir Rock Properties
· Porosity
· Saturation
· Permeability
Open - Hole Logging Tools and Measurements: Lithology Tools
· Gamma Ray, Spectral Gamma Ray
· Spontaneous Potential (SP)
· Caliper Logs
Porosity Tools
· Sonic Logs
· Density Logs
· Neutron Logs
Resistivity Tools
· Laterologs
· Induction Logs
· Micro-Spherical Logs (MSFL)
Curve Editing
· Depth Matching, despiking, splicing and multiple run merge
· Correct Curve selected for loading
· Environmental Effect and Corrections
· Curve Mnemonics for different service company
· Digitizing and scanning of old log data
Coring and Core Analysis Data
· Brief Introduction to parameters of core analysis results
· Data loading format of core analysis output parameters
Log Quality Control
· Log data Quality Control and data selection
· LQC on output processing parameters and digital data format (for example
the difference between Ss & Swu or Sxo & Sxou)
Cased-Hole Logging Tools and Processing
· Cement Bond (and it’s correlation to OH data)
· Thermal Decay Time
· Production Logging
· Casing Collar Log (and it’s relation to Perforations)
Geological Tools
· Dipmeter Tools
· Image Tools
Other Tools
· Nuclear Magnetic Resonance
· Modular Dynamics Tester
| Code | From | To | City | Fee | |
|---|---|---|---|---|---|
| GP05 | 13 Jan 2020 | 24 Jan 2020 | Kuala Lumpur | US$ 7500 | Book |
| GP05 | 22 Mar 2020 | 02 Apr 2020 | Cairo | US$ 6500 | Book |
| GP05 | 04 May 2020 | 15 May 2020 | Istanbul | US$ 7500 | Book |
| GP05 | 13 Jul 2020 | 24 Jul 2020 | California | US$ 9000 | Book |
| GP05 | 06 Sep 2020 | 17 Sep 2020 | Dubai | US$ 7000 | Book |
| GP05 | 09 Nov 2020 | 20 Nov 2020 | Jakarta | US$ 8500 | Book |
|
DUBAI OFFICE
Ittihad Deira Building, |
USA OFFICE 642 E14 Street,10009-13 Manhattan, New York (NY) USA info@petrogas-training.com |
EGYPT OFFICE 52 General Kamal Hejab Street,Suez Bridge, Cairo, Egypt info@petrogas-training.com |
Certificate of Completion will be provided to the candidate(s) who successfully attend and complete the course. Training hours attendance percentage of 75% is required.
Standard course hours: 8:30 A.M. to 3:30 P.M. Informal discussions: 4:30 P.M. to 5:30 P.M.
We use a blend of interactive and hands-on methods, active participation, a variety of instructional techniques, dynamic presentations, individual and group exercises, in depth discussion, DVD’s, role-plays, case studies, examples. All of the information, competencies, knowledge and skills acquired within our training programs, are 100% transferrable to the participants’ workplace.
Pre-Test and Post-Test Assessment are applied on 5-day and 10-day programs. Also, post course evaluation and candidate’s evaluation are applied to add another level of quality measurement. Candidates’ feedback is highly appreciated to elevate the training service quality.
A- Have staff trained in the latest training and development approaches
B- Support nationalization and talent management initiatives
C- Have properly trained and informed people who will be able to add value
D- Gain relevant technical knowledge, skills and competencies
A- Develop job related skills
B- Develop personal skills in subject matter
C- Have a record of your growth and learning results
D- Bring proof of your progress back to your organization
F- Become competent, effective and productive
G- Be more able to make sound decisions
H- Be more effective in day to day work by mastering job-related processes
I- Create and develop competency to perform job well
A- 10% discount after 05 candidates’ registration.
B- 15% discount after 10 candidates’ registration.
C- 20% discount after 20 candidates’ registration.
D- 25% discount after 25 candidates’ registration.
E- 30% discount after 30 candidates’ registration
F- Higher discount rates will be offered based on work volume with different clients.
A- One extra free seat is offered on 4 candidates on the same course and dates.
B- Two extra free seats are offered on 6 candidates on the same course and dates.
C- Three extra free seats are offered on 8 candidates on the same course and dates.
D- Four extra free seats are offered on 10 candidates on the same course and dates.
E- Five extra free seats are offered on 12 candidates on the same course and dates.
Nominations to our public courses are to be processed by the client’s Training and/or HR departments. A refund will be issued back to the client in the event of course cancellation or seat unavailability. A confirmation will be issued to the relevant department official(s).
If a confirmed registration is cancelled less than 5 working days prior to the course start date, a substitute participant may be nominated to attend the same course or a 20% cancellation charge is applied. In case of a no-show, a 100% fee will be charged.
PAYMENT POLICY
Payment is due upon receiving the course confirmation, invoice and/or proforma invoice. However; the fee due can be wire transferred to our bank account directly after course completion. Our bank details are illustrated on the confirmation, invoice and proforma invoice, as well. The above documents can be communicated electronically, i.e., in a soft copy or/and in hard copy based on customer’s request.
COPYRIGHT
© 2017. Material published by PETROGAS shown here is copyrighted. © 2017. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing in any medium, transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.
2015 © Copyrights Petrogas
